Table of Contents
Advertisement
2
Currency
Select
3
Select Settings.
4
Enter the first currency name (e.g. Euro). Press OK.
Enter the second currency name (e.g. Dollar). Press OK.
Enter the exchange rate using
5
Press
OK
to validate the entry. Press
To calculate the conversion between the selected currencies:
1
Press OK. Select Tools.
2
Currency
Select
3
Select one of the first two options.
4
Enter the amount to be converted. Press
5
Press OK. The converted amount and the exchange rate information are displayed.
Alarm clock
This feature allows you to set a daily Reminder Alarm.
To set a time and turn the alarm on:
1
Press OK. Select Tools.
2
Alarm
clock.
Select
3
Select
On
and enter the alarm time or press
is displayed when reverting to the standby display.
When 'on', the alarm operates at the same time every day until turned off.
If the phone is off at alarm time, it automatically switches on.
If the phone is locked or if the PIN setting is on, the phone returns to this locked state after the
alarm has rung until you use it.
If the alarm is acknowledged but not validated after the 3rd (and final) alarm, the alarm indica-
tors remain on the display for up to 15 minutes (the mobile then either goes back to its 'on' or
'off' previous state).
If a call is in progress at alarm time a 'Call in progress' alert beep sounds and a visual alert is displayed every
3 minutes. Validate or acknowledge the alarm in the usual way.
To use the alarm as a Reminder or a Snooze Alarm:
1
No
ring, or any other key (except
Press
icons remain on the display and the alarm starts ringing again 3 minutes later.
Valid
Or press
To turn the alarm off:
1
Press OK. Select Tools.
2
Select
Alarm clock
3
Select Off.
Infrared port
The infrared port allows you to exchange data between the mobile and other devices (provided
they have an infrared port).
You can for instance download or send files such as images for your Standby display (see "Pic-
tures", page 42 ), send or receive name cards,...
To initiate a transfer via the infrared port, your mobile must be facing another infrared port.
Both ports can then be opened and synchronised. The requested transfer can be performed.
Objects (e.g name cards) are transferred one by one.
converter.
to enter a decimal point.
Save
converter.
OK
or
to acknowledge the alarm and stop the alarm clock process.
.
to confirm data storage.
to insert a decimal point if needed.
OK
to validate the displayed time.
Valid.
and OK) to snooze the alarm. The alarm
Tools
18-
Advertisement
Table of Contents
