Updating The Oven Menu; Making A Copy Of The Oven Menu; Updating The Oven Firmware - TurboChef NGO/SOTA Service Manual

16 INFO, TEST, AND EDIT MODE

Updating the Oven Menu

NOTE: If your oven receives updates from Oven
Connect , then manually updating the menu is
TM
not recommended.
NOTE: To update a menu, you may need to verify
that access to the Load Menu screen is turned on.
See the Set Options Screen section on page 12 for
more details.
To load a menu to the oven,
1. Go to screen 2 of the Info Mode (Figure 13,
page 11).
2. Press the R1 soft key to access the Load
Menu screen (Figure 23).
3. Insert the smart card (Figure 24).
- White for SOTA
- Gray for SBK NGO
4. Press the L1 soft key (Figure 23).
5. Verify the oven beeps and reads FINISHED.

Making a Copy of the Oven Menu

NOTE: To make a copy of the oven menu, you
may need to verify that access to the Load Menu
screen is turned on. See the Set Options Screen
section on page 12 for more details.
To save a copy of the menu to a smart card,
1. Go to screen 2 of the Info Mode (Figure 13,
page 11).
2. Press the R1 soft key to access the Load
Menu screen (Figure 23).
3. Insert the smart card (Figure 24).
- White for SOTA
- Gray for SBK NGO
4. Press the L2 soft key (Figure 23).
5. Verify the oven beeps and reads FINISHED.
L1
LOA D ME NU F R OM C A RD
L2
SAVE TO C A RD
L3
L4
Figure 23: Loading...Finished
R1
F INI SH ED
R2
R3
R4

Updating the Oven Firmware

CAUTION: The oven will be inoperable if
the firmware update is unsuccessful!
From the Oven Off screen,
1. Insert the gray smart card "1 of 3" (Figure 24).
2. When the oven is cooling down or off, press
and hold the Info key until the oven resets
(approximately 5 seconds).
3. The oven will produce a series of short beeps.
When the oven beeps one long tone, insert
card "2 of 3."
4. The oven will again produce a series of short
beeps. When the oven beeps one long tone,
insert card "3 of 3."
5. The oven will again produce a series of short
beeps. When the oven beeps one long tone,
remove the smart card.
6. The oven will restart, indicating the update is
complete.
NOTE: If the update is unsuccessful, the display
will remain off and the oven will beep one long,
low tone. If the update fails multiple times,
contact TurboChef as a card may be damaged.
Smart Card
Figure 24: Inserting Smart Card
Smart Card Reader Slot