Setting The Date & Time; Setting Alarm 1 & Alarm 2 - Electrohome EAAC601 User Manual

• The timing of Automatic DST/Summer Time employed by the unit
(see above) is subjected to variations by region and the law in each
country/region. In such a case, cancel the Automatic DST/Summer Time
adjustment.
• If you live in a country/region that has not introduced Daylight Saving
Time/Summer Time, you must cancel Automatic DST/Summer Time
adjustment before using the unit.
Setting the Date & Time
To change the Date/Time, press and hold the
appear in the following order:
YEAR > MONTH > DAY > 12/24 H > HOUR > MIN
1. Press the
2. To confirm your selection, press the
Setting Alarm 1 & Alarm 2
Press the ALARM 1
setting and then press and hold to enter the alarm set mode. The alarm time will
flash, and the settings will appear in the following order:
HOUR > MIN > ALARM MODES > WAKE OPTIONS > RADIO VOLUME
3. Press the
or button to confirm HOUR. The MINUTES will begin to flash.
4. Press the
or button to confirm MINUTES. Alarm modes will flash.
Alarm modes allow you to set more than one alarm in a week e.g.,
ALARM 1 set to wake you Monday-Friday and ALARM 2
you on weekends.
Alarm mode settings:
1-5 : Monday to Friday
1-7 : Whole week
or buttons to toggle through the settings
or ALARM 2
or buttons to decrease/increase the HOUR; press the
or buttons to decrease/increase the MINUTES; press the
button. The settings will
button once again.
button once to view the current alarm
6-7 : Saturday & Sunday
1-1 : One day of week
8
(if applicable)
set to wake