Setting Up The Bluetooth - Kinetik BPM100 User Manual

SETTING UP BEFORE USE
5. Then repeat steps 2 and 3 to set the correct date. When you have the correct date
press the set button again.
6. Finally, set the clock. You will need to choose if you would like to use 12 hour or
24 hour clock.
7. Then repeat steps 2 and 3 to set the correct time. When you have the correct time
press the set button again.
8. Repeat steps 2 and 3 to set the measurement unit.
9. Finally repeat steps 2 and 3 again and the display will show 'on'. When everything
is set the display will say 'done' and the unit will turn off.
10

Setting up the Bluetooth

1. Download the Kinetik Health app from the Android or Apple Store on to your
phone or tablet.
2. Now, pair the Blood Pressure Monitor with your chosen device. You need to open
the app on your device and then press the start/stop button on the monitor. The
Bluetooth symbol will flash to indicate pairing is in progress.
3. Select the correct user ID to connect up to the app. If pairing is successful the
screen will display 'done'. If unsuccessful the screen will show 'Err' and you will
need to start again.
4. After pairing is complete the monitor will turn off until you are ready to use it.
Bluetooth Module No.:
AW2540MV1
RF Frequency Range: 2402 MHz to 2480 MHz
Output Power Range:
-1 dBm
Supply Voltage:
2V-3.6 V
Transmitting Distance:
10 meters
SETTING UP BEFORE USE
11