Remote Control Overview; Connection Of Power Supply Controller And Device Messages - Kikusui PWR400L Operation Manual

7.1

Remote Control Overview

In addition to operating the PWR from the front panel, you can
use a power supply controller (PIA4830/PIA4850/PIA4810) to
remotely control the PWR via the USB, GPIB or RS232C inter-
face.
• Version 2.20 or later is required for the PIA4800 series
• The PIA3200 Power Supply Controller is not supported.
7.2 Connection of Power Supply Controller
and Device messages
The PWR and power supply controller are connected via a TP-
BUS. Up to 32 devices can be connected to the TP-BUS.
For details on the Power Supply Controller, see the operation
manual of the respective product. For connection to a Power
Supply Controller and device messages, refer to the
"Connecting & Programming Guide" [index.html] in the CD-
ROM that came with the PIA4800 series.
The "Connecting & Programming Guide" is HTML format that
can be viewed with a WWW (World Wide Web) browser. The
HTML manual can be viewed using the following browsers.
Operating environment: Windows 98 or later
Browser: Microsoft Internet Explorer 5.5 or later
The list of messages and connection of power supply of
Connecting & programming guide is provided in a PDF file.
Adobe Reader 6.0 or later is required to view the file.
The latest version of the "Connecting & Programming Guide"
can be downloaded from Web site (http://www.kikusui.co.jp/
en/download/).
7-2
Power Supply Controller. If you are using an earlier ver-
sion, you need to update the firmware. For details, con-
tact your Kikusui agent.
You can check the PIA4800 series version using *IDN?.
PWR