Table of Contents
Advertisement
Sloped Roof Bolt Mounting Kit
Mounting parallel bench srew mountingsystem
1 )
2 )
3 )
4 )
14
12
General Note: Points 9-12, 17 and 18 of these instructions only apply
when mounting more than two collectors!
1:
A = 1540 mm ±10 mm
Measure the mounting points (for a suggestion see previous side)
2:
Drill tiles - Ø 14mm (Note: On roofs with corrugated tiles
do not drill boreholes in the tile trough!)
3:
Drill rafters - Ø 8mm
4:
Fasten bench screw, minimum screw depth ≥ 100mm
Roof fixing bolts are drilled down through
the slate or tile covering the roof. The rub-
ber gasket on the bolt keeps the penetra-
tion point in the roof weather proofed.
The bolt is connected to the profile by
use of a stainless steel L plate and nuts,
bolts and washers. The bolt head slides
through the profile to the desired location
and the L bracket to fixed using the nut
and washer.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the NAVITAS and is the answer not in the manual?
Questions and answers