Nobles SPEED SCRUB 300 Operator's Manual
  1. Manuals
  2. Brands
  3. Nobles Manuals
  4. Scrubber
  5. SPEED SCRUB 300
  6. Operator's manual

Nobles SPEED SCRUB 300 Operator's Manual

Hide thumbs Also See for SPEED SCRUB 300:
Table of Contents

Advertisement

Quick Links

ENGLISH
®
SPEED SCRUB 300
®
AUTOMATIC FLOOR SCRUBBER
OPERATOR MANUAL
9014512
Rev. 00 (03-2015)
For the latest Parts manuals and other
language Operator manuals, visit:
*9014512*
www.nobles.com/manuals

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SPEED SCRUB 300 and is the answer not in the manual?

Questions and answers

Related Manuals for Nobles SPEED SCRUB 300

Summary of Contents for Nobles SPEED SCRUB 300

  • Page 1 ENGLISH ® SPEED SCRUB 300 ® AUTOMATIC FLOOR SCRUBBER OPERATOR MANUAL 9014512 Rev. 00 (03-2015) For the latest Parts manuals and other language Operator manuals, visit: *9014512* www.nobles.com/manuals...
  • Page 2 Phone: (800) 553- 8033 or (763) 513- 2850 www.nobles.com Trojan and HydroLINK are registered trademarks of Trojan Battery Company. Specifications and parts are subject to change without notice. Original Instructions. Copyright E2015 Tennant Company. All rights reserved. Nobles Speed Scrub 300 (03- 2015)

  • Page 3: Table Of Contents

    DRAINING SOLUTION TANK ... . . SERVICE INDICATOR CODES ....Nobles Speed Scrub 300 (03- 2015)

  • Page 4: Operation

    Use care when reversing machine. wearers or medical implants. Keep children and unauthorized persons away from machine. Do not allow machine to be used as a toy. Nobles Speed Scrub 300 (03- 2015)
  • Page 5 Use a hoist or adequate assistance when lifting batteries. Battery installation must be done by trained personnel. Wear personal protection equipment as needed and where recommended in this manual. For Safety: wear protective gloves. For Safety: wear eye protection. Nobles Speed Scrub 300 (03- 2015)

  • Page 6: Safety Labels

    Spinning brush. Keep hands away. Located on cylindrical scrub head model. WARNING LABEL - Magnetic Field Hazard. Magnetic pad driver/brush can be harmful to pacemaker wearers or medical implants. Located on Insta-Click magnetic pad driver/brush. Nobles Speed Scrub 300 (03- 2015)

  • Page 7: Machine Components

    11. Squeegee foot pad 12. Squeegee assembly 13. Control handle 14. Control handle start bail 15. Speed control knob (drive model) 16. Forward/Reverse lever (drive model) 17. Control panel display 18. Emergency stop button (option) Nobles Speed Scrub 300 (03- 2015)

  • Page 8: Machine Symbols

    4. ec-H2O indicator (Option) - Lights up blue when ec-H2O system is activated and operating normally. Parking brake (option) No detergent (ec-H2O option) Water temperature (ec-H2O option) Solution flow No Solution flow Circuit breaker Nobles Speed Scrub 300 (03- 2015)

  • Page 9: Installing Batteries

    Use insulated tools when working near batteries. FIG. 4 BLACK 3. Reconnect the battery cable connection after FIG. 2 installing battery pack. IMPORTANT: Make sure that the machine’s battery charger is properly set before charging. See BATTERY CHARGER SETTINGS. Nobles Speed Scrub 300 (03- 2015)

  • Page 10: How The Machine Works

    Heavy duty stripping pad (Black) - Used for aggressive stripping of heavy finishes/sealers, or very heavy duty scrubbing. Surface preparation pad (Maroon) - Used for very aggressive chemical free removal of floor finish to prepare the floor for re-coating Nobles Speed Scrub 300 (03- 2015)

  • Page 11: Machine Setup

    3. Connect the vacuum hose to the squeegee quick counter-clockwise turn to engage hub (Figure assembly (Figure 7). 10). View through the scrub head window to align lugs. FIG. 7 FIG. 10 Nobles Speed Scrub 300 (03- 2015)

  • Page 12: Installing Brush/Pad

    (Figure 13). FIG. 15 3. Place the pad driver/brush under the scrub head and lift into position. The Insta-Click pad driver/brush will automatically click into position (Figure 16). FIG. 13 FIG. 16 Nobles Speed Scrub 300 (03- 2015)

  • Page 13: Installing Pad - Orbital

    (Figure 22). 1. Step down on the scrub head lift pedal to raise the scrub head off the floor (Figure 19). FIG. 22 FIG. 19 Nobles Speed Scrub 300 (03- 2015)

  • Page 14: Filling Solution Tank

    Make sure the idler plate clips to hold hose while filling. The two clips are hooks are engaged before tightening knob (Figure different hose diameter sizes (Figure 28). 26). FIG. 26 FIG. 28 6. Replace debris tray. Nobles Speed Scrub 300 (03- 2015)

  • Page 15: Ec-H2O Nanoclean Water Conditioning Cartridge (Ec-H2O Model)

    75 minutes. and off the rails for additional accessory storage (Figure 32). FIG. 32 Nobles Speed Scrub 300 (03- 2015)

  • Page 16: Machine Operation

    ATTENTION: Do not step on accessory ATTENTION: During first time use and after replacing rails, damage may occur. the water conditioning cartridge, the ec-H2O system will automatically override the selected solution flow rate for up to 75 minutes. Nobles Speed Scrub 300 (03- 2015)
  • Page 17 5. Lower the squeegee assembly to floor by stepping on foot pad as shown (Figure 38). To raise squeegee assembly, place toe under foot pad and lift. The vacuum motor will start when squeegee assembly is lowered. FIG. 41 FIG. 38 Nobles Speed Scrub 300 (03- 2015)

  • Page 18: While Operating Machine

    Keep the metal scrub head edge away to avoid possible damage. FIG. 43 11. Speed Scrub 300 Option - When extra brush pressure is needed for heavily soiled areas lift the down pressure lever (Figure 44). NOTE: Release the down pressure level when raising scrub head.

  • Page 19: Emergency Shut-Off Button

    HOUR METER The hour meter records the number of hours the machine has been operated. Use the hour meter to FIG. 47 perform specific maintenance procedures and to record service history (Figure 49). FIG. 49 Nobles Speed Scrub 300 (03- 2015)

  • Page 20: Draining Tanks

    3. Remove and clean the float shut-off screen (Figure 51). FIG. 54 Firmly reconnect the solution hose to accessory rail after draining tank. FIG. 51 Nobles Speed Scrub 300 (03- 2015)

  • Page 21: Service Indicator Codes

    Restart machine. If fault repeats, contact ser-  S S S  Propel I-Drive communication lost vice. Propel motor shorted fault Contact service.  S S  S Brush motor over current Contact service.  S S  Nobles Speed Scrub 300 (03- 2015)
  • Page 22 80F/27C or less. If fault persists, contact ser- vice. Charger communication fault Restart charger. If fault code persists, contact S    S service. Charger timer exceeded maximum charging Replace Batteries. S   S  time. Interrupts charging cycle. Nobles Speed Scrub 300 (03- 2015)
  • Page 23 *Verify if cleaning detergent was added to solution tank. If ec-H2O system was operated with cleaning detergent, drain solution tank, add clear water and operate the ec-H2O system until the fault code clears. Nobles Speed Scrub 300 (03- 2015)

  • Page 24: Maintenance

    Lower orbital isolators Replace (4 qty) 750 Hours Vacuum motor Replace carbon brushes 1250 Hours Propel motor Replace carbon brushes Brush motor Replace carbon brushes Brush belt Replace belt O = Operator T = Trained Personnel Nobles Speed Scrub 300 (03- 2015)

  • Page 25: Machine Maintenance

    (Figure 58). FIG. 62 6. Insta-Click pad driver/brushes - clean any debris buildup from hub connection area (Figure 63). FIG. 58 3. Remove and clean the float shut-off screen (Figure 59). FIG. 63 FIG. 59 Nobles Speed Scrub 300 (03- 2015)

  • Page 26: After Weekly Use

    9. Clean the outside surface of the machine with an all purpose cleaner and damp cloth (Figure 66). FIG. 70 FIG. 66 10. Cylindrical scrub head - Remove and clean debris trough (Figure 67). FIG. 67 Nobles Speed Scrub 300 (03- 2015)

  • Page 27: After Every 50 Hours Of Use

    Replace motor carbon brushes as indicated. Contact trained personnel for carbon brush replacement. Carbon Brush Replacement Hours Vacuum motor Propel motor (drive model) 1250 Disk brush motor 1250 FIG. 73 Cylindrical brush motor 1250 Orbital brush motor 1250 Nobles Speed Scrub 300 (03- 2015)

  • Page 28: Belts

    Add distilled water if low. DO NOT OVERFILL. The electrolyte will expand and may overflow when charging. After charging, distilled water can be added up to about 3 mm (0.12 in) below the sight tubes. FIG. 77 Nobles Speed Scrub 300 (03- 2015)

  • Page 29: Checking Connections / Cleaning

    LEAD-ACID BATTERIES. 4. For models equipped with on-board chargers, remove the charger’s power cord from the storage hooks and plug power cord into a properly grounded wall outlet (Figure 80). FIG. 79 FIG. 80 Nobles Speed Scrub 300 (03- 2015)

  • Page 30: Battery Charger Settings

    6. After charging batteries unplug the power supply cord and wrap cord around the cord hooks (Figure 83). For models equipped with an off-board charger, always disconnect the AC power supply cord first before disconnecting charger from machine. FIG. 85 FIG. 83 Nobles Speed Scrub 300 (03- 2015)
  • Page 31 “0” otherwise battery damage may result. 7. Replace the black cap on charger, reinstall battery charger and replace control console. 8. Reconnect the battery cable connection. FIG. 87 Nobles Speed Scrub 300 (03- 2015)

  • Page 32: Hydrolink Battery Watering System

    FIG. 92 6. After adding water, replace the dust cap on the battery fill hose and store the hand pump hose inside the machine’s battery compartment for future use. FIG. 89 Nobles Speed Scrub 300 (03- 2015)

  • Page 33: Squeegee Blade Replacement

    5. Squeeze the squeegee frame and blade retainer retainer and squeegee frame together. together and re-tighten the two outside knobs (Figure 96). FIG. 93 3. Remove worn blade(s) from the blade retainer FIG. 96 (Figure 94). FIG. 94 Nobles Speed Scrub 300 (03- 2015)

  • Page 34: Ec-H2O Nanoclean Water Conditioning Cartridge Replacement

    3. Disconnect the two hose connectors from the top of the cartridge by pressing the gray collars inward and pulling the connectors outward (Figure 98). Lift cartridge to remove. Solution flow button Gray Collar FIG. 100 FIG. 98 Nobles Speed Scrub 300 (03- 2015)

  • Page 35: Loading/Unloading Machine For Transporting

    ATTENTION: Do not use control console area or accessory storage rails for tie-down locations, damage may occur. FIG. 102 Nobles Speed Scrub 300 (03- 2015)

  • Page 36: Troubleshooting

    Reset circuit breaker Poor scrubbing Debris caught in brush/pad Remove debris performance Worn brush/pad Replace brushes/pad Incorrect brush pressure Adjust brush pressure Wrong brush/pad type Use correct brush/pad for application Low battery charge Recharge batteries Nobles Speed Scrub 300 (03- 2015)
  • Page 37 Defective battery or end of battery life Replace batteries Battery discharge indicator (BDI) See CHARGING BATTERIES programmed incorrectly Faulty charger Replace battery charger Brush pressure set too high Lower brush pressure. Lower dual down pres- sure lever Nobles Speed Scrub 300 (03- 2015)

  • Page 38: Specifications

    84.3 dB(A) 84.3 dB(A) 84.3 dB(A) uncertainty K Machine vibration at hand-arm* <2.5 m/s Ambient operating temperature Min: 32F/0C, Max: 110F/43C *Values per EN 60335- 2- 72. Specifications are subject to change without notice. Nobles Speed Scrub 300 (03- 2015)
  • Page 39 Sound power level uncertainty L 83.8 dB(A) 84.2 dB(A) 83.5 dB(A) uncertainty K Machine vibration at hand-arm* <2.5 m/s Ambient operating temperature Min: 32F/0C, Max: 110F/43C *Values per EN 60335- 2- 72. Specifications are subject to change without notice. Speed Scrub 300 (03- 2015)

  • Page 40: Machine Dimensions

    508 mm 17 in / 43 cm 17 in / 43 cm Model Model 54 in 22 in 1372 mm 559 mm 20 in / 50 cm 20 in / 50 cm Model Model Nobles Speed Scrub 300 (03- 2015)
  • Page 41 SPECIFICATIONS DUAL DISK MODEL 30.4 in 772 mm 43.1 in 1095 mm 51.25 in 26 in 1314 mm 660 mm Speed Scrub 300 (03- 2015)
  • Page 42 SPECIFICATIONS CYLINDRICAL BRUSH MODEL 30.4 in 772 mm 43.1 in 1095 mm 50.5 in 25 in 1283 mm 635 mm Nobles Speed Scrub 300 (03- 2015)
  • Page 43 SPECIFICATIONS ORBITAL PAD MODEL 30.4 in 772 mm 43.1 in 1095 mm 49 in 20.5 in 1245 mm 521 mm Speed Scrub 300 (03- 2015)
  • Page 44 ® SPEED SCRUB 300 ® AUTOMATIC FLOOR SCRUBBER  Hygenic Fully Cleanable Recovery Tank  TennantTrue Parts PARTS MANUAL 9014511 For the latest Parts manuals and other Rev. 00 (03-2015) language Operator manuals, visit: *9014511* www.nobles.com/manuals...
  • Page 45 - identifies parts included in assembly Installation Date - Tennant Company PO Box 1452 Minneapolis, MN 55440 Phone: (800) 553- 8033 or (763) 513- 2850 www.nobles.com Specifications and parts are subject to change without notice. Copyright E 2015 TENNANT Company, Printed in U.S.A.
  • Page 46 ......SOLUTION GROUP, BASE MODEL ec- H20 ..Nobles Speed ScrubR 300 (03- 2015)

  • Page 47: General Recommended Maintenance Items

    Pad, Buff, 12.0d, Red [1pick=1pad] 385942 (00000000- Pad, Scb, 12.0d, Blu [1pick=1pad] 385943 (00000000- Pad, Stripping, 12.0d, Brown[1pick=1pad] 1063334 (00000000- Pad, Stripping, 12.0d [Hi- Prod] Blk 1051020 (00000000- Pad, Surf Prep, 12.0d [Mar, 1pick=1pad] Nobles Speed ScrubR 300 (03- 2015)
  • Page 48 (00000000- Fan, Vacuum, 6.6d, 024vdc, 2 Stage  Vr, Brush Kit, Motor, Fan (1 Pkg = 2 Pcs) 1206774 (00000000- 1207357 (00000000- Tray, Debris, Tank, Recvy [T300] 630052 (00000000- Float, Shut- Off, (2)Ball, 1.75d Nobles Speed ScrubR 300 (03- 2015)
  • Page 49 Caster, Swivel [Wicke 224051] 1211537 (00000000- Filter, In- Line, Pf06/Pf06 080m 2.6l Epd  1218885 (00000000- Gasket [Epdm, F/1211537] 1218883 (00000000- Screen, Fltr, 80 Mesh, Ss [W/ Cage] Filter, In- Line, Pf06/Pf06 080m 2.6l Epd 1211537 (00000000- Nobles Speed ScrubR 300 (03- 2015)

  • Page 50: Recommended Maintenance Items

    RECOMMENDED MAINTENANCE ITEMS Nobles Speed ScrubR 300 (03- 2015)

  • Page 51: Brushes And Pad Driver Group, 43Cm Disk 3- Lug Hub

    STANDARD PARTS BRUSHES AND PAD DRIVER GROUP, 43CM DISK 3- LUG HUB 355330 Nobles Speed ScrubR 300 (03- 2015)
  • Page 52 (00000000- Pad, Scb, 17.0d, Blue [1pick=1pad] 11 1050267 (00000000- Pad, Stripping, 17.0d, Brown[1pick=1pad] 11 1050262 (00000000- Pad, Stripping, 17.0d[Hi Pro,1pick=1pad] 11 1051028 (00000000- Pad, Surf Prep, 17.0d [Mar, 1pick=1pad]  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 53: Brushes And Pad Driver Group, 43Cm Disk Magnetic Hub

    STANDARD PARTS BRUSHES AND PAD DRIVER GROUP, 43CM DISK MAGNETIC HUB 355338 Nobles Speed ScrubR 300 (03- 2015)
  • Page 54 Pad, Buff, 17.0d, Red [1pick=1pad] 1050270 (00000000- Pad, Scb, 17.0d, Blue [1pick=1pad] 1050267 (00000000- Pad, Stripping, 17.0d, Brown[1pick=1pad] 1050262 (00000000- Pad, Stripping, 17.0d[Hi Pro,1pick=1pad] 1051028 (00000000- Pad, Surf Prep, 17.0d [Mar, 1pick=1pad]  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 55: Brushes And Pad Driver Group, 50Cm Disk 3- Lug Hub

    STANDARD PARTS BRUSHES AND PAD DRIVER GROUP, 50CM DISK 3- LUG HUB 355331 Nobles Speed ScrubR 300 (03- 2015)
  • Page 56 (00000000- Pad, Scb, 20.0d, Blu [1pick=1pad] 11 17263 (00000000- Pad, Stripping, 20.0d, Brown[1pick=1pad] 11 370094 (00000000- Pad, Stripping, 20.0d[Hi Prod,1pick=1pad 11 1051030 (00000000- Pad, Surf Prep, 20.0d [Mar, 1pick=1pad]  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 57: Brushes And Pad Driver Group, 50Cm Disk Magnetic Hub

    STANDARD PARTS BRUSHES AND PAD DRIVER GROUP, 50CM DISK MAGNETIC HUB 355339 Nobles Speed ScrubR 300 (03- 2015)
  • Page 58 Pad, Buff, 20.0d, Red [1pick=1pad] 17262 (00000000- Pad, Scb, 20.0d, Blu [1pick=1pad] 17263 (00000000- Pad, Stripping, 20.0d, Brown[1pick=1pad] 370094 (00000000- Pad, Stripping, 20.0d[Hi Prod,1pick=1pad 1051030 (00000000- Pad, Surf Prep, 20.0d [Mar, 1pick=1pad]  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 59: Brushes And Pad Driver Group, 60Cm Dual Disk 3- Lug Hub

    STANDARD PARTS BRUSHES AND PAD DRIVER GROUP, 60CM DUAL DISK 3- LUG HUB 355332 Nobles Speed ScrubR 300 (03- 2015)
  • Page 60 Pad, Scb, 12.0d, Blu [1pick=1pad] 10 385943 (00000000- Pad, Stripping, 12.0d, Brown[1pick=1pad] 10 1063334 (00000000- Pad, Stripping, 12.0d [Hi- Prod] Blk 10 1051020 (00000000- Pad, Surf Prep, 12.0d [Mar, 1pick=1pad]  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 61: Brushes And Pad Driver Group, 60Cm Dual Disk Magnetic Hub

    STANDARD PARTS BRUSHES AND PAD DRIVER GROUP, 60CM DUAL DISK MAGNETIC HUB 355340 Nobles Speed ScrubR 300 (03- 2015)
  • Page 62 385942 (00000000- Pad, Scb, 12.0d, Blu [1pick=1pad] 385943 (00000000- Pad, Stripping, 12.0d, Brown[1pick=1pad] 1063334 (00000000- Pad, Stripping, 12.0d [Hi- Prod] Blk 1051020 (00000000- Pad, Surf Prep, 12.0d [Mar, 1pick=1pad]  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 63: Brushes Group, 50Cm Cylindrical

    STANDARD PARTS BRUSHES GROUP, 50CM CYLINDRICAL 355333 Ref. Part No. Serial Number Description Qty. 1209188 (00000000- Brush, Scb, 21l, 20sr, Nyl 1212762 (00000000- Brush, Scb, 21l, 20sr, Pyp Nobles Speed ScrubR 300 (03- 2015)

  • Page 64: Pad Group, 50Cm Orbital

    1205513 (00000000- Pad, Buff, 20 X 14, Red [1pick=1pc] 1205514 (00000000- Pad, Scb, 20 X 14, Blu [1pick=1pc] 1205515 (00000000- Pad, Surf Prep, 20 X 14[Mar, 1pick=1pad] 1217830 (00000000- Pad, Backer, 20 X 14 Nobles Speed ScrubR 300 (03- 2015)

  • Page 65: Scrub Head Group, 43Cm Disk, 3- Lug Hub

    STANDARD PARTS SCRUB HEAD GROUP, 43CM DISK, 3- LUG HUB 355290 Nobles Speed ScrubR 300 (03- 2015)
  • Page 66 22 1210676 (00000000- Hub, Drive, 3 Lug [Machined] 23 1017218 (00000000- Washer, Flat, 0.32b 1.00d .12, Ss 24 1020341 (00000000- Screw, Hex, M8 X 1.25 X 20, Ss, Sems  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 67: Scrub Head Group, 43Cm Disk, Magnetic Hub

    STANDARD PARTS SCRUB HEAD GROUP, 43CM DISK, MAGNETIC HUB 355294 Nobles Speed ScrubR 300 (03- 2015)
  • Page 68 Washer, Flat, 0.32b 1.00d .12, Ss 25 1020341 (00000000- Screw, Hex, M8 X 1.25 X 20, Ss, Sems 26 630114 (00000000- Screw, Flt, Phl, M4 X 0.70 X 8, 4.8  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 69: Scrub Head Group, 50Cm Disk, 3- Lug Hub

    STANDARD PARTS SCRUB HEAD GROUP, 50CM DISK, 3- LUG HUB 355291 Nobles Speed ScrubR 300 (03- 2015)
  • Page 70 22 1210676 (00000000- Hub, Drive, 3 Lug [Machined] 23 1017218 (00000000- Washer, Flat, 0.32b 1.00d .12, Ss 24 1020341 (00000000- Screw, Hex, M8 X 1.25 X 20, Ss, Sems  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 71: Scrub Head Group, 50Cm Disk, Magnetic Hub

    STANDARD PARTS SCRUB HEAD GROUP, 50CM DISK, MAGNETIC HUB 355295 Nobles Speed ScrubR 300 (03- 2015)
  • Page 72 Washer, Flat, 0.32b 1.00d .12, Ss 25 1020341 (00000000- Screw, Hex, M8 X 1.25 X 20, Ss, Sems 26 630114 (00000000- Screw, Flt, Phl, M4 X 0.70 X 8, 4.8  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 73: Scrub Head Group, 60Cm Dual Disk, 3- Lug Hub

    STANDARD PARTS SCRUB HEAD GROUP, 60CM DUAL DISK, 3- LUG HUB 355292 Nobles Speed ScrubR 300 (03- 2015)
  • Page 74 Screw, Hex, M6 X 1.00 X 16, Sems, Ss 19 1211027 (00000000- Housing, Head, 60cm [Machined] 20 1216346 (00000000- Bracket Wldt, Guard, Splash, 60cm 21 1072656 (00000000- Bumper, Head, 60cm, Bristle Skirt  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)
  • Page 75 STANDARD PARTS SCRUB HEAD GROUP, 60CM DUAL DISK, 3- LUG HUB - CONT’D 355335 Nobles Speed ScrubR 300 (03- 2015)
  • Page 76 Ring, Retaining, Int, 40mm, Ss 19 1211624 (00000000- Stud, M8 X 1.25, Dbl End W/Hex, Ss 20 1059206 (00000000- Hub, Drive, 3lug, Alm, 2disk, 6grv 21 019680127 (00000000- Washer, Flat, 6.2mm Id X 22.0mm Od X 1.9 Nobles Speed ScrubR 300 (03- 2015)

  • Page 77: Scrub Head Group, 60Cm Dual Disk, Magnetic Hub

    STANDARD PARTS SCRUB HEAD GROUP, 60CM DUAL DISK, MAGNETIC HUB 355296 Nobles Speed ScrubR 300 (03- 2015)
  • Page 78 20 1072656 (00000000- Bumper, Head, 60cm, Bristle Skirt 21 1211907 (00000000- Pin, Stop, Short 22 1212785 (00000000- Spring, Cmpr, .66od, .05wir, 1.75l, Ss 23 1211242 (00000000- Button, Plunger, Pad  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)
  • Page 79 STANDARD PARTS SCRUB HEAD GROUP, 60CM DUAL DISK, MAGNETIC HUB - CONT’D 355336 Nobles Speed ScrubR 300 (03- 2015)
  • Page 80 Ring, Retaining, Int, 40mm, Ss 17 1211624 (00000000- Stud, M8 X 1.25, Dbl End W/Hex, Ss 18 1210503 (00000000- Hub, Drive, Magnetic, Grooved, 60cm Dd 19 019680127 (00000000- Washer, Flat, 6.2mm Id X 22.0mm Od X 1.9 Nobles Speed ScrubR 300 (03- 2015)

  • Page 81: Scrub Head Group, 50Cm Cylindrical

    STANDARD PARTS SCRUB HEAD GROUP, 50CM CYLINDRICAL 355297 Nobles Speed ScrubR 300 (03- 2015)
  • Page 82  Key, Sq, 04mm X 04mm, 15mml 1217769 (00000000- 22 1039817 (00000000- Vr, Brush Kit, Motor, Ele (1 Pkg = 4 Pcs) 23 49548 (00000000- Connector, Anderson, 050a, Red  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)
  • Page 83 STANDARD PARTS SCRUB HEAD GROUP, 50CM CYLINDRICAL - CONT’D 355298 Nobles Speed ScrubR 300 (03- 2015)
  • Page 84 Screw, Btn, M5 X 0.8 X 16, 8.8, Nl, Torx 29 1215666 (00000000- Skirt, Side, Cyl, Floating 30 1216728 (00000000- Cover, Skirt, Cyl Head 31 019680127 (00000000- Washer, Flat, 6.2mm Id X 22.0mm Od X 1.9  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 85: Scrub Head Group, 50Cm Orbital

    STANDARD PARTS SCRUB HEAD GROUP, 50CM ORBITAL 355293 Nobles Speed ScrubR 300 (03- 2015)
  • Page 86 Nut, Hex, Lock, M5 X 0.80, Nl, Ss 22 01683 (00000000- Washer, Flat, 10, Ss 23 140916 (00000000- Clamp, Cable, Nyl, 0.62d, Nat 24 1074344 (00000000- Harness, Ele [Ring With .250m Tail]  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 87: Recovery Tank Group, Base Model

    STANDARD PARTS RECOVERY TANK GROUP, BASE MODEL 355301 Nobles Speed ScrubR 300 (03- 2015)
  • Page 88 (00000000- Hinge, 6mm Pin 2.5 73.5mmw 60.0mml, Bent 13 1034731 (00000000- Screw, Hex, M6 X 1.00 X 16, Sems, Ss 14 1210807 (00000000- Wire, Tie [W/.25” Fir Tree Clip]  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 89: Recovery Tank Filter And Hose Group, Screw Cap

    STANDARD PARTS RECOVERY TANK FILTER AND HOSE GROUP, SCREW CAP 355303 Nobles Speed ScrubR 300 (03- 2015)
  • Page 90 Tube, Hose, Adapter, 1.5d [T300] 13 01684 (00000000- Washer, Flat, 0.27b 0.69d .05, Ss 14 1204663 (00000000- Hose Assy, W/2cuff,1.5d 026l 1.5/1.5[Pu] 14 1211220 (00000000- Hose Assy,W/2cuff,1.5d 022l 1.5/1.5[Pvc]  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 91: Recovery Tank Filter And Hose Group, Control Valve

    STANDARD PARTS RECOVERY TANK FILTER AND HOSE GROUP, CONTROL VALVE 355341 Nobles Speed ScrubR 300 (03- 2015)
  • Page 92 Tube, Hose, Adapter, 1.5d [T300] 14 01684 (00000000- Washer, Flat, 0.27b 0.69d .05, Ss 15 1204663 (00000000- Hose Assy, W/2cuff,1.5d 026l 1.5/1.5[Pu] 16 11531 (00000000- Clamp, Hose, Wormdrive, 1.06- 2.00d, .56w  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 93: Solution Tank Group

    STANDARD PARTS SOLUTION TANK GROUP 355304 Nobles Speed ScrubR 300 (03- 2015)
  • Page 94 Chain, Ball, 10, 0157mml, Ss 16 1214249 (00000000- Tray, Accssry, Rh, 16mm Screw 17 1018155 (00000000- Screw, Pan, Phl, M5 X 0.80 X 16, Tcut,Ss 18 9013845 (00000000- Clip Kit, Rail, [T300/T300e/Ss300] (Accessory Option) Nobles Speed ScrubR 300 (03- 2015)

  • Page 95: Frame Group, Propel Model

    STANDARD PARTS FRAME GROUP, PROPEL MODEL 355318 Nobles Speed ScrubR 300 (03- 2015)
  • Page 96 31 08712 (00000000- Nut, Hex, Lock, M6 X 1.00, Nl, Ss N/S 1073676 (00000000- Harness, Main, Ele [Vw, Base, Propel] N/S 1073592 (00000000- Harness, Ele [Vw, Op.Sta, Propel ]  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 97: Frame Group, Push Model

    STANDARD PARTS FRAME GROUP, PUSH MODEL 355319 Nobles Speed ScrubR 300 (03- 2015)
  • Page 98 Washer, Flat, 0.27b 0.69d .05, Ss 28 08712 (00000000- Nut, Hex, Lock, M6 X 1.00, Nl, Ss N/S 1073677 (00000000- Harness, Main, Ele [Vw, Base, Push] N/S 1073593 (00000000- Harness, Ele [Vw, Op.Stat, Push] Nobles Speed ScrubR 300 (03- 2015)

  • Page 99: Manual Dual Down Pressure Group

    STANDARD PARTS MANUAL DUAL DOWN PRESSURE GROUP 355283 Nobles Speed ScrubR 300 (03- 2015)
  • Page 100 Cover, Lever Assy, Down- Press 16 01683 (00000000- Washer, Flat, 10, Ss 17 1205799 (00000000- Screw, Btn, M5 X 0.8 X 16, 8.8, Nl, Torx 18 80491 (00000000- Sleeve, P/M, 0.25b 0.38d 0.2l [430ss] Nobles Speed ScrubR 300 (03- 2015)

  • Page 101: Single Down Pressure Group

    STANDARD PARTS SINGLE DOWN PRESSURE GROUP 355284 Nobles Speed ScrubR 300 (03- 2015)
  • Page 102 Screw, Hex, M6 X 1.00 X 16, Sems, Ss 1205799 (00000000- Screw, Btn, M5 X 0.8 X 16, 8.8, Nl, Torx 01683 (00000000- Washer, Flat, 10, Ss 1212336 (00000000- Cover, Pulley Assy, Down- Press Nobles Speed ScrubR 300 (03- 2015)

  • Page 103: Solution Group, Base Model

    STANDARD PARTS SOLUTION GROUP, BASE MODEL 355307 FROM TANK SITE TUBE FROM SOL TO SCRUB TANK HEAD Nobles Speed ScrubR 300 (03- 2015)
  • Page 104 (00000000- Gasket [Epdm, F/1211537] 1218883 (00000000- Screen, Fltr, 80 Mesh, Ss [W/ Cage] Filter, In- Line, Pf06/Pf06 080m 2.6l Epd 1211537 (00000000- 14 1212810 (00000000- Fitting, Plstc, Tee, Qm08/Qf08/Qf08  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 105: Solution Group, Base Model Ec- H20

    STANDARD PARTS SOLUTION GROUP, BASE MODEL ec- H20 355309 22 23 TO SCRUB HEAD FROM SOL TANK SITE TUBE FROM SOL TANK Nobles Speed ScrubR 300 (03- 2015)
  • Page 106 Filter, In- Line, Pf06/Pf06 080m 2.6l Epd 1211537 (00000000- 44 1212810 (00000000- Fitting, Plstc, Tee, Qm08/Qf08/Qf08 45 1074344 (00000000- Harness, Ele [Ring With .250m Tail] 46 41140 (00000000- Washer, Lock, Int- Ext, 0.25  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 107: Electrical Components Group, Base Model

    STANDARD PARTS ELECTRICAL COMPONENTS GROUP, BASE MODEL 355320 Nobles Speed ScrubR 300 (03- 2015)
  • Page 108 35 09739 (00000000- Nut, Hex, Lock, M5 X 0.80, Nl, Ss 36 01683 (00000000- Washer, Flat, 10, Ss 37 1012216 (00000000- Relay, 24vdc, 070a, Spst No, Plug- In 38 1208628 (00000000- Gasket, Cover, Circuitboard Nobles Speed ScrubR 300 (03- 2015)

  • Page 109: Lower Console Group, On- Board Charger

    STANDARD PARTS LOWER CONSOLE GROUP, ON- BOARD CHARGER 355328 Nobles Speed ScrubR 300 (03- 2015)
  • Page 110 20 1216531 (00000000- Frame, Column, Cntrl [Revised Machined] Plug, Hole, Rnd, 0.88d, Blk (Push Model) 21 130161 (00000000- Plug, Hole, Rt, 1.23 X 1.12, Nyl (Standard Model) 22 582150 (00000000-  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 111: Lower Console Group, Off- Board Charger

    STANDARD PARTS LOWER CONSOLE GROUP, OFF- BOARD CHARGER 355329 Nobles Speed ScrubR 300 (03- 2015)
  • Page 112 (00000000- Cord, Power, 16/3, 15ft Blk [Us] Plug, Hole, Rnd, 0.88d, Blk (Push Model) 21 130161 (00000000- Plug, Hole, Rt, 1.23 X 1.12, Nyl (Standard Model) 22 582150 (00000000-  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 113: Handle Group, Base Propel Model

    STANDARD PARTS HANDLE GROUP, BASE PROPEL MODEL 355326 Nobles Speed ScrubR 300 (03- 2015)
  • Page 114 Screw, Btn, M5 X 0.8 X 16, 8.8, Nl, Torx 15 1205778 (00000000- Handle, Bail [Machined] 16 1207004 (00000000- Cover, Handle, Cntrl N/S 1072524 (00000000- Harness, Ele [Bail Switch]  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 115: Handle Group, Base Push Model

    STANDARD PARTS HANDLE GROUP, BASE PUSH MODEL 355327 Nobles Speed ScrubR 300 (03- 2015)
  • Page 116 Screw, Btn, M5 X 0.8 X 16, 8.8, Nl, Torx 11 1205778 (00000000- Handle, Bail [Machined] 12 1207004 (00000000- Cover, Handle, Cntrl N/S 1072524 (00000000- Harness, Ele [Bail Switch]  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 117: Shroud Group, Disk And Orbital Head

    STANDARD PARTS SHROUD GROUP, DISK AND ORBITAL HEAD 355299 Nobles Speed ScrubR 300 (03- 2015)
  • Page 118 (00000000- Cover, Head, Disk, Im- Hg [T300] 01684 (00000000- Washer, Flat, 0.27b 0.69d .05, Ss 11329 (00000000- Screw, Hex, M6 X 1.00 X 16, Nl, Ss 80491 (00000000- Sleeve, P/M, 0.25b 0.38d 0.2l [430ss] Nobles Speed ScrubR 300 (03- 2015)

  • Page 119: Shroud Group, Cylindrical Head

    STANDARD PARTS SHROUD GROUP, CYLINDRICAL HEAD 355300 Nobles Speed ScrubR 300 (03- 2015)
  • Page 120 Cover, Head, Cylrcl, Im- Hg [T300] 01684 (00000000- Washer, Flat, 0.27b 0.69d .05, Ss 11329 (00000000- Screw, Hex, M6 X 1.00 X 16, Nl, Ss 80491 (00000000- Sleeve, P/M, 0.25b 0.38d 0.2l [430ss]  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 121: Scrub Head Lift Group, 43Cm Disk Model

    STANDARD PARTS SCRUB HEAD LIFT GROUP, 43CM DISK MODEL 355354 16 17 Nobles Speed ScrubR 300 (03- 2015)
  • Page 122 (00000000- Screw, Hex, M8 X 1.25 X 25, Ss, Nl 23 1032791 (00000000- Spacer, Head, 4mm [Ss3] (Push Model) 24 1210256 (00000000- Bracket Wldt, Mtg, Head, 50d, Tall [Vw]  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 123: Scrub Head Lift Group, 50Cm Disk Model

    STANDARD PARTS SCRUB HEAD LIFT GROUP, 50CM DISK MODEL 355355 16 17 Nobles Speed ScrubR 300 (03- 2015)
  • Page 124 (00000000- Screw, Hex, M8 X 1.25 X 25, Ss, Nl 23 1032791 (00000000- Spacer, Head, 4mm [Ss3] (Push Model) 24 1210256 (00000000- Bracket Wldt, Mtg, Head, 50d, Tall [Vw]  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 125: Scrub Head Lift Group, 60Cm Dual Disk Model

    STANDARD PARTS SCRUB HEAD LIFT GROUP, 60CM DUAL DISK MODEL 355356 17 18 14 12 Nobles Speed ScrubR 300 (03- 2015)
  • Page 126 Screw, Hex, M8 X 1.25 X 30, Nl, Ss 18 01685 (00000000- Washer, Flat, 0.38b 0.88d .08, Ss 19 1213224 (00000000- Bracket Wldt, Mtg, Head, 60dd, Short[Vw] 20 1074344 (00000000- Harness, Ele [Ring With .250m Tail]  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 127: Scrub Head Lift Group, 50Cm Cylindrical Model

    STANDARD PARTS SCRUB HEAD LIFT GROUP, 50CM CYLINDRICAL MODEL 355357 14 12 12 13 Nobles Speed ScrubR 300 (03- 2015)
  • Page 128 23 1205799 (00000000- Screw, Btn, M5 X 0.8 X 16, 8.8, Nl, Torx 24 1216222 (00000000- Bracket Wldt, Mtg, Head Washer, Flat, 1.03b 1.50d .03, Nylon 25 1210112 (00000000-  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 129: Scrub Head Lift Group, 50Cm Orbital Model

    STANDARD PARTS SCRUB HEAD LIFT GROUP, 50CM ORBITAL MODEL 355358 18 12 14 12 Nobles Speed ScrubR 300 (03- 2015)
  • Page 130 18 01685 (00000000- Washer, Flat, 0.38b 0.88d .08, Ss 19 1212572 (00000000- Bracket Wldt, Mtg, Head, Orb, Short [Vw] 20 1213223 (00000000- Bracket Wldt, Mtg, Head, Orb, Tall [Vw]  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 131: Squeegee Group

    STANDARD PARTS SQUEEGEE GROUP 355305 Nobles Speed ScrubR 300 (03- 2015)
  • Page 132 (00000000- Spring, Cmpr, 0.98od .146wir 02.5l 37 1209782 (00000000- Pin, Guide, Spring 38 80491 (00000000- Sleeve, P/M, 0.25b 0.38d 0.2l [430ss] 39 08182 (00000000- Pin, Cotter, .125 X 1.00  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 133: Battery Group, 105Ah C20 Wet

    STANDARD PARTS BATTERY GROUP, 105AH C20 WET 355359 Nobles Speed ScrubR 300 (03- 2015)
  • Page 134 Cap, Battery, White [For 105ah & 130ah] 611221 (00000000- Boot, Terminal, Battery, 25.4mm, Blk 1073628 (00000000- Cable, Battery, 4ga [M8 Ring/M8 Ring] Cable, Battery, 4ga [M8 Ring/M8 Ring] 1073629 (00000000- 87435 (00000000- Nut, Hex, Flexlock, .31- 18 Nobles Speed ScrubR 300 (03- 2015)

  • Page 135: Battery Group, 130Ah C20 Wet

    STANDARD PARTS BATTERY GROUP, 130AH C20 WET 355360 Nobles Speed ScrubR 300 (03- 2015)
  • Page 136 Cap, Battery, White [For 105ah & 130ah] 611221 (00000000- Boot, Terminal, Battery, 25.4mm, Blk 1073628 (00000000- Cable, Battery, 4ga [M8 Ring/M8 Ring] Cable, Battery, 4ga [M8 Ring/M8 Ring] 1073629 (00000000- 87435 (00000000- Nut, Hex, Flexlock, .31- 18 Nobles Speed ScrubR 300 (03- 2015)

  • Page 137: Battery Group, 155Ah C20 Wet

    STANDARD PARTS BATTERY GROUP, 155AH C20 WET 355361 Nobles Speed ScrubR 300 (03- 2015)
  • Page 138 Cap, Battery, Black [For 155ah] 611221 (00000000- Boot, Terminal, Battery, 25.4mm, Blk 1073628 (00000000- Cable, Battery, 4ga [M8 Ring/M8 Ring] Cable, Battery, 4ga [M8 Ring/M8 Ring] 1073629 (00000000- 87435 (00000000- Nut, Hex, Flexlock, .31- 18 Nobles Speed ScrubR 300 (03- 2015)

  • Page 139: Battery Group, 140Ah C20 Agm

    STANDARD PARTS BATTERY GROUP, 140AH C20 AGM 355362 Nobles Speed ScrubR 300 (03- 2015)
  • Page 140 (00000000- Boot, Terminal, Battery, 25.4mm, Blk 1073628 (00000000- Cable, Battery, 4ga [M8 Ring/M8 Ring] Cable, Battery, 4ga [M8 Ring/M8 Ring] 1073629 (00000000- 87435 (00000000- Nut, Hex, Flexlock, .31- 18  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 141: Label Group

    STANDARD PARTS LABEL GROUP 355366 Nobles Speed ScrubR 300 (03- 2015)
  • Page 142 Label, Opertnl, Solution Knob Adj 1214279 (00000000- Label, Orbital, Size, 50cm (Orbital Head) 1206159 (00000000- Label, Logo, 05.5l [Nobles] 1215264 (00000000- Label, Speed Scrub 300 1216533 (00000000- Label, Logo [Ech2o Nano Nobles] (ec- H2O Model) Nobles Speed ScrubR 300 (03- 2015)
  • Page 143 STANDARD PARTS LABEL GROUP - CONT’D 355367 Nobles Speed ScrubR 300 (03- 2015)
  • Page 144 STANDARD PARTS LABEL GROUP - CONT’D Ref. Part No. Serial Number Description Qty. 1218392 (00000000- Label, Safety, Magnet, Med (Magnetic Heads) 1215774 (00000000- Label Sheet, Info/Hzrd [Na] Nobles Speed ScrubR 300 (03- 2015)

  • Page 145: Electrical Diagram, Propel Membrane

    STANDARD PARTS ELECTRICAL DIAGRAM, PROPEL MEMBRANE (PAGE 1 OF 3) 1074707_00 Nobles Speed ScrubR 300 (03- 2015)
  • Page 146 STANDARD PARTS ELECTRICAL DIAGRAM, PROPEL MEMBRANE (PAGE 2 OF 3) 1074707_00 Nobles Speed ScrubR 300 (03- 2015)
  • Page 147 STANDARD PARTS ELECTRICAL DIAGRAM, PROPEL MEMBRANE (PAGE 3 OF 3) 1074707_00 Nobles Speed ScrubR 300 (03- 2015)

  • Page 148: Electrical Diagram, Push Membrane

    STANDARD PARTS ELECTRICAL DIAGRAM, PUSH MEMBRANE (PAGE 1 OF 3) 1074708_00 Nobles Speed ScrubR 300 (03- 2015)
  • Page 149 STANDARD PARTS ELECTRICAL DIAGRAM, PUSH MEMBRANE (PAGE 2 OF 3) 1074708_00 Nobles Speed ScrubR 300 (03- 2015)
  • Page 150 STANDARD PARTS ELECTRICAL DIAGRAM, PUSH MEMBRANE (PAGE 3 OF 3) 1074708_00 Nobles Speed ScrubR 300 (03- 2015)

  • Page 151: Electrical Harness, Main Propel

    STANDARD PARTS ELECTRICAL HARNESS, MAIN PROPEL (PAGE 1 OF 3) 1073676 Nobles Speed ScrubR 300 (03- 2015)
  • Page 152 STANDARD PARTS ELECTRICAL HARNESS, MAIN PROPEL (PAGE 2 OF 3) 1073676 Nobles Speed ScrubR 300 (03- 2015)
  • Page 153 STANDARD PARTS ELECTRICAL HARNESS, MAIN PROPEL (PAGE 3 OF 3) 1073676 Nobles Speed ScrubR 300 (03- 2015)
  • Page 154 STANDARD PARTS ELECTRICAL HARNESS, MAIN PROPEL Part No. Serial Number Description Qty. 1073676 (00000000- Harness, Main, Ele [Vw, Base, Propel]  222290 (00000000- Diode, Ele, Plug  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 155: Electrical Harness, Main Push

    STANDARD PARTS ELECTRICAL HARNESS, MAIN PUSH (PAGE 1 OF 3) 1073677 Nobles Speed ScrubR 300 (03- 2015)
  • Page 156 STANDARD PARTS ELECTRICAL HARNESS, MAIN PUSH (PAGE 2 OF 3) 1073677 Nobles Speed ScrubR 300 (03- 2015)
  • Page 157 STANDARD PARTS ELECTRICAL HARNESS, MAIN PUSH (PAGE 3 OF 3) 1073677 Nobles Speed ScrubR 300 (03- 2015)
  • Page 158 STANDARD PARTS ELECTRICAL HARNESS, MAIN PUSH Part No. Serial Number Description Qty. 1073677 (00000000- Harness, Main, Ele [Vw, Base, Push]  222290 (00000000- Diode, Ele, Plug  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 159: Electrical Harness, Options Propel

    STANDARD PARTS ELECTRICAL HARNESS, OPTIONS PROPEL 1073592 Part No. Serial Number Description Qty. 1073592 (00000000- Harness, Ele [Vw, Op.Sta, Propel ] Nobles Speed ScrubR 300 (03- 2015)

  • Page 160: Electrical Harness, Options Push

    STANDARD PARTS ELECTRICAL HARNESS, OPTIONS PUSH 1073593 Part No. Serial Number Description Qty. 1073593 (00000000- Harness, Ele [Vw, Op.Stat, Push] Nobles Speed ScrubR 300 (03- 2015)

  • Page 161: Electrical Harness, Bail Switch

    STANDARD PARTS ELECTRICAL HARNESS, BAIL SWITCH 1072524 Part No. Serial Number Description Qty. 1072524 (00000000- Harness, Ele [Bail Switch] Nobles Speed ScrubR 300 (03- 2015)
  • Page 162 STANDARD PARTS Nobles Speed ScrubR 300 (03- 2015)

  • Page 163: Battery Lift Out Box Kit

    OPTIONS BATTERY LIFT OUT BOX KIT 355306 Nobles Speed ScrubR 300 (03- 2015)
  • Page 164 Strap, Pyp, Buckle, Friction 130773 (00000000- Tie, Cable, Nyl, 11.0l, .14w, 3.0 Max. D 1214509 (00000000- Bracket, Deflector, Battery 1034731 (00000000- Screw, Hex, M6 X 1.00 X 16, Sems, Ss  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 165: Hydrolinkr Battery Watering System Kit

    OPTIONS HYDROLINK BATTERY WATERING SYSTEM KIT 355316 Nobles Speed ScrubR 300 (03- 2015)
  • Page 166 Cap, Fill, Battery [Trojan] 1071084 (00000000- Label, Tag, Battery [Hydrolink Watering] 130773 (00000000- Tie, Cable, Nyl, 11.0l, .14w, 3.0 Max. D  ASSEMBLY INCLUDED IN ASSEMBLY HYDROLINKR IS A REGISTERED TRADEMARK OF TROJAN BATTERY COMPANY. Nobles Speed ScrubR 300 (03- 2015)

  • Page 167: Ec- H20 Nanoclean Module Breakdown

    BREAKDOWNS ec- H20 NANOCLEAN MODULE BREAKDOWN 355317 Nobles Speed ScrubR 300 (03- 2015)
  • Page 168 Clamp, Hose, Wir, .40 - .42, Yel 12 54333 (00000000- Clamp, Hose, Wormdrive, 0.31- 0.88d, .31w 13 1073286 (00000000- Harness, Ele, Module B2 [Ec- H2o] 14 9014127 (00000000- Controller Kit, Replmt [Ec- H2o Nc]  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

  • Page 169: Orbital Head Eccentric Drive Breakdown

    BREAKDOWNS ORBITAL HEAD ECCENTRIC DRIVE BREAKDOWN 355337 Nobles Speed ScrubR 300 (03- 2015)
  • Page 170 Screw, Soc, M6 X 1.00 X 12, 8.8, Low 12 1208266 (00000000- O- Ring, 57.15 X 3.18, Nbr 13 1212710 (00000000- Screw, Flt, Soc, M6 X 1.00 X 35, 10.9,Nl  ASSEMBLY INCLUDED IN ASSEMBLY Nobles Speed ScrubR 300 (03- 2015)

Table of Contents

Save PDF