Miller Electric Maxstar 150 STH Specifications

Maxstar
Light Industrial Applications
Process Pipe
Quick
Dairy Industry
Food/Beverage Industry
Specs
Restaurant/Kitchen Repair
Experimental Aircraft
Shipboard Installation/Repair
Maintenance Repair
The Power of Blue
Auto-Line provides state-of-the-art
™
flexibility to the end user. The Auto-
Line circuitry automatically connects
to 115–230 VAC, single-phase power
without removing the covers to relink
the power source. No longer is there a
concern if you have the correct
machine for the shop or job site.
Miller's exclusive
multi-voltage
plug (MVP ™ ) allows
connection to 115
or 230 V receptacles
without tools —
choose the plug that fits the receptacle
and connect it to the power cord.
Portable in the shop or at the job
site — at 13.7 lb the shoulder strap
allows the end user to easily move
from location to location.
Built-in pulsing capabilities allow the
operator to select from four fixed pulse
frequencies to satisfy the application.
HF start for non-contact arc starting
that eliminates tungsten or material
contamination.
Selectable trigger configuration allows
the operator to choose standard or 2T
trigger method to meet the application.
Lift-Arc start provides TIG arc starting
™
without the use of high frequency.
Built-in gas solenoid eliminates the
need for bulky torch with a gas valve.
Full function remote control for
precise amperage control for critical
welds on thin materials (6-pin fingertip
or foot control available.)
150 STH
®
Processes
TIG (GTAW)
Pulsed TIG (GTAW-P)
Stick (SMAW)
Input Power
1-Phase Power
.
®
TIG/Stick Package (#907 136-01-7) comes complete with:
Maxstar 150 STH
10 ft (3 m) MVP ™ power cord
MVP ™ plugs 5-15P (115 V, 15 A) and 6-50P (230 V, 50 A)
X-CASE ™ provides protection in transport and storage
Remote fingertip control
Weldcraft ® WP1712RD125 TIG torch with adapter
13 ft (4 m) Stick electrode holder with 25 mm Dinse connector
10 ft (3 m) work clamp with 25 mm Dinse connector
Smith ® regulator with gas hose
AK-2C accessory kit
Shoulder strap
Power source is warranted for 3 years, parts and labor.
Original main power rectified parts are warranted for 5 years.
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Amperage Range
Max. Open-Circuit Voltage
Weight
13.7 lb (6.2 kg)
New Case and
Improved!
MVP Plugs!
International Headquarters
Phone: 920-735-4505
USA FAX: 920-735-4134
Canadian FAX: 920-735-4169
International FAX: 920-735-4125
Issued February 2008 • Index No. DC/27.2
TIG/Stick Welding

Power Source

115 VAC: 5 – 150 A (DC TIG)
20 – 100 A (DC Stick)
230 VAC: 5 – 150 A (DC TIG)
20 – 150 A (DC Stick)
90
Thermal overload protection with
indicator light helps prevent
machine damage if the duty cycle is
exceeded or airflow is blocked.
Single amperage range allows
operator to accurately set amperage
on both 115 or 230 V primary power.
Inverter-based, DC power source has
a simple-to-use operator interface
providing only the necessary
controls in a compact machine.
Adaptive Hot Start ™ for Stick arc
starts automatically increases the
output amperage at the start of a
weld should the start require it.
Prevents the electrode from
sticking and creating an inclusion.
Low OCV Stick is a simple design
that reduces the open-circuit
voltage to 12–16 volts when the
welding power source is not in use.
This circuit design is now built into
the Maxstar 150 STH eliminating the
need for add-on voltage reducers.
Best in class Stick arc character -
istics for those demanding jobs.
Power Factor Corrected (PFC) for
optimum performance especially
on 115 V — reduces nuisance
breaker tripping.
Fan-On-Demand ™ power source
cooling system operates only when
needed, reducing noise, energy use
and the amount of contaminants
pulled through the machine.
Web Site
www.MillerWelds.com