Table of Contents
Advertisement
16
LOST TRANSMITTER MODE
Your 300/302 transmitter allows the user to turn on a 6 hour timer. After
6 hours the transmitter will begin beeping providing the ability to locate
the transmitter in tall grass.
Lost transmitter mode is activated by pressing the light (L) button and
then simultaneously pressing the stimulation button (Black "S") when the
intensity level is set to zero. Three short beeps will sound confirming the
activation of the locator timer.
Lost transmitter mode is turned off by turning your transmitter off and
back on again.
Stimulation
Button (Black)
Stimulation
Booster
Button(Red)
Turn off the lost transmitter beeper by simply turning the transmitter off
and back on.
300/302 Owner's Manual
Light and
On/Off Button
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 300 and is the answer not in the manual?
Questions and answers
When I pair the transmitter to the receiver the collar only flashes red and not green and therefore doesn’t turn on. Would this be a dead or low battery in the collar?
If the E-Collar 300 collar only flashes red when pairing, it may indicate a low or dead battery. According to the manual, the collar blinks red when recharging is required. It is recommended to recharge the battery immediately to avoid irreversible damage.
This answer is automatically generated
My collar won't light up. Is there a batteryin the collar/
Yes, the E-Collar 300 has a battery. If it won't light up, possible reasons include a dirty or worn charging port, or the battery may be near the end of its lifespan, especially if the collar has been used for several years. Pushing the charger in or moving it to get a light suggests a poor connection, possibly due to wear.
This answer is automatically generated