Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for E-Collar 300
Summary of Contents for E-Collar 300
- Page 2 Welcome to the World of E-Collar Technologies, Inc. 300 Series E-Collar Remote Education Collar Thank you for purchasing the 300 or 302 Remote Education Collar from E-Collar Technologies, Inc. We have made every attempt to provide you with the most technologically advanced product using the most stringent quality and manufacturing standards.
-
Page 3: Table Of Contents
......- Turning Your E-Collar ON/OFF ...... -
Page 4: Important Notice
To prevent giving stimulation to your dog by accident, keep the stimulation level below 5 while not in use. The range of the 300/302 may vary according to terrain, weather conditions, foliage, and power lines as well as radio transmissions from other devices. -
Page 5: Characteristics
Stimulation Boosting Mode provides instant control when • normal stimulation is ignored - great for emergency situations. User Adjustable Boosting Levels from 1 to 60 Levels • Completely Waterproof • Convertible from 1-Dog 300 to 2-Dog 302 • 300/302 Owner’s Manual... -
Page 6: Package Contents
Receivers and straps) • • Battery Charger Owner’s Manual (302 package contains splitter cable) Welcome to the World of E-Collar Technologies, Inc. 300/302 Owner's Manual • • Extra Contact Points 3/4" Test Light • • Contact Point Tool Lanyard 300/302 Owner’s Manual... -
Page 7: Device Operation
Light and On/Off Button or Tone/Stimulation Button On/Off Magnetic Red Dot Battery Charging Receptacle and Rubber Cover Collar Strap 5/8” Contact Points Battery Charging On/Off Magnetic Red Dot Receptacle and Battery Indicator Light Rubber Cover and Tracking Light 300/302 Owner’s Manual... -
Page 8: Charging The Batteries
(approximately 2 hours) Special Not About Battery Care: Your e-collar is outfitted with Li Polymer batteries which requires specific care to assure longevity. It is best not to let the battery be fully discharged and if it does recharge immediately or irreversible damage may occur. -
Page 9: Turning Your E-Collar On/Off
TURNING YOUR E-COLLAR ON/OFF • To turn the Collar Receiver On or Off : Place the small red dot on the Transmitter against the small red dot on the Collar Receiver. Red Dots • To turn the Transmitter On or Off : Press the “L”... -
Page 10: Correctly Fitting The Collar
Antibiotic ointment will aid in the healing process. Some dog breeds have extra thick fur or extra short fur that requires special contact points. -
Page 11: The Lcd Display Description
Momentary / Continuous Button "M/C"- M/C Button on the backside of the transmitter allows the user to easily switch between the three stimulation modes. Function of stimulation button changes by mode. Momentary Continuous Stimulation Combo Mode Mode Mode Button Tapping Sensation or Tone/Stimulation 300/302 Owner’s Manual... -
Page 12: Button Functions
- The default value of the boosted level is 5, it can be adjusted to any value between 1 and 60. Smaller and more sensitive breeds should use levels 1 through 20, larger more stubborn breeds may need more of a boost, maximum boost is 60. 300/302 Owner’s Manual... - Page 13 When pressed less than an 1/2 second, it will turn on the night tracking light, pressing it again the light will enter the solid mode and pressing Flashing -> Solid -> OFF one more time turns the light off. Great for locating your dog after dark. (PLEASE PRACTICE) 300/302 Owner’s Manual...
-
Page 14: How To Find The Proper Stimulation Level
“conditioning” stimulation level. You may need to increase the “conditioning” level a few levels to get your dog to respond at first, some dogs are more stubborn and need more stimulation. The boosted level is typically 5 to 20 levels higher than the “conditioning” level. 300/302 Owner’s Manual... -
Page 15: Lock/Unlock The Stimulation Level
If the stimulation level doesn’t change when you rotate the stimulation knob, you have successfully locked the stimulation level. To unlock the stimulation level simply press the stimulation knob again and hold it for 1 second until the "1D" icon flashes. 300/302 Owner’s Manual... -
Page 16: How To Set The Boost
4. The intensity level will change from "0" to a flashing "1". 5. Rotate the dial to the desired boost level (1 to 60). 6. Press S(Black) button again to save and exit the boost level changing mode. "Instructional Videos available on our Youtube Channel" 300/302 Owner’s Manual... -
Page 17: Lost Transmitter Mode
LOST TRANSMITTER MODE Your 300/302 transmitter allows the user to turn on a 6 hour timer. After 6 hours the transmitter will begin beeping providing the ability to locate the transmitter in tall grass. Lost transmitter mode is activated by pressing the light (L) button and then simultaneously pressing the stimulation button (Black "S") when the... -
Page 18: Replace/Add A Collar Receiver
HOW TO CHANGE THE TRANSMITTER TO A 2 DOG TRANSMITTER The button functions will change. The changes are described on pages 18 through 22. You can change the transmitter back to the 300 one dog system at any time. 1. Turn on the Transmitter. -
Page 19: 302 Lcd Description
Dog 2 Continuous or Tone Stimulation Dog 2 Momentary Dog 2 Continuous (Red) (Black) Booster Booster "L" in Dog 1 set mode will control Dog 1 light "L" in Dog 2 set mode will control Dog 2 light 300/302 Owner’s Manual... -
Page 20: 302 Button Functions
To toggle between tapping sensation and pavlovian tone/stimulation press “L” and “T” buttons simultaneously for 2 seconds when the intensity level is “0”. - Single beep and “A” icon indicates pavlovian tone/stimulation - Two beeps and “T” icon indicates tapping sensation. 300/302 Owner’s Manual... - Page 21 Vibration specifically designed to distract your dog. Tone followed by Stimulation (Pavlovian Conditioning) After 1.2 seconds of tone, the collar will administer continuous stimulation for as long as the button is pressed (up to 10 seconds). Release before 1.2 seconds for tone only. 300/302 Owner’s Manual...
-
Page 22: How To Lock/Unlock The Stimulation Level
If the stimulation level doesn’t change when you rotate the stimulation knob, you have successfully locked the stimulation level. To unlock the stimulation level simply press the stimulation knob again at 1D/2D mode and it will unlock the stimulation level. 300/302 Owner’s Manual... -
Page 23: 302 Boost Level Setup
Boost Level Change Mode. If any other button is pressed or is idle for 20 sec, Boost Level Change Mode will be cancelled. If you want to change boost level for Dog 2 (Red Collar Dog), Press S(Red) instead of black on step #3, and #6 300/302 Owner’s Manual... -
Page 24: Testing Your E-Collar
8 and 25 depending on the dryness of their hands. Feel free to contact us if you have need help, 1-855-326-5527. 300/302 Owner’s Manual... -
Page 25: Replacing The Contact Points
* For short haired breeds such as boxers, dachshund, pit bulls, etc, and thick fur breeds please visit our website or contact us to inquire about special contact points for your dog. 300/302 Owner’s Manual... -
Page 26: Training Tips
The technique used in the initial introduction of the e-collar is very important to the success of e-collar training. Search E-Collar Technologies on youtube and subscribe to our channel, new training videos are posted weekly. -
Page 27: Troubleshooting
Make sure 1D or 2D on transmitter LCD is blinking. If 1D or 2D icons are solid, you cannot change stimulation. You can unlock the stimulation at any time by pressing the stimulation knob fo 2 seconds. CONTACT US FOR EXPERT HELP WITH YOUR E-COLLAR 300/302 Owner’s Manual... -
Page 28: Two Year Warranty
Misuse, improper maintenance, lost units are not covered by this warranty. Your complete satisfaction is our only concern. The 300/302 mini Educator you have is our most recent design, it is different from the previous 300TS and 302TS, so please let us know that you have the new mini Educator design when communicating with us. -
Page 29: Accessories
ACCESSORIES • • Micro-Probes Contact Points 50% Stimulation Reducer • • Thick-Hair Contact Points Short Probe Comfort Adapter • • Car Charger Leather Belt Holster (specify Right or Left hand) • • Belt Clip Small Dog Adapter 300/302 Owner’s Manual... - Page 30 • • 3/4” Quick Snap Nylon Collar Sew-On Holster (black or red) • • 3/4” Bungee Collar Dummy Collar (24” or 30” length) (specify Nylon or Biothane strap) • • Deluxe Hard Carry Case 1” MAX Probes 300/302 Owner’s Manual...
-
Page 31: Safety And General Information
Hospital or Health Care Facility or enter the facility without turning off both units. An FCC license is not needed to operate 300/302 remote e-collar transmitters. However, any change or modification made to the transmitter, including the supplied antenna, without the expressed written approval of E-Collar Technologies, Inc. - Page 32 TRAINING NOTES 300/302 Owner’s Manual...
- Page 33 TRAINING NOTES 300/302 Owner’s Manual...
- Page 34 Copyright 2015 E-Collar Technologies, Inc. All Rights Reserved.
Need help?
Do you have a question about the 300 and is the answer not in the manual?
Questions and answers
When I pair the transmitter to the receiver the collar only flashes red and not green and therefore doesn’t turn on. Would this be a dead or low battery in the collar?
If the E-Collar 300 collar only flashes red when pairing, it may indicate a low or dead battery. According to the manual, the collar blinks red when recharging is required. It is recommended to recharge the battery immediately to avoid irreversible damage.
This answer is automatically generated
My collar won't light up. Is there a batteryin the collar/
Yes, the E-Collar 300 has a battery. If it won't light up, possible reasons include a dirty or worn charging port, or the battery may be near the end of its lifespan, especially if the collar has been used for several years. Pushing the charger in or moving it to get a light suggests a poor connection, possibly due to wear.
This answer is automatically generated