Changing The Status Of A Setting - Miele H4042BM Operating And Installation Instructions

Changing the status of a
setting
^ Turn the function selector to
Light / .
^ Select "OK".
P
"P I" appears in the display.
The settings "P I" to "P 7" can be
changed individually.
^ Press V or W until the desired setting
number appears in the display.
^ Select "OK".
S
The current status of the setting "S"
(example) appears in the display.
^ Use V or W to change the setting
status (see table).
^ Select "OK".
The status change is stored in memory.
"P" and the number of the setting
appear again in the display.
Other settings can also be changed at
this time as long as the function
selector is not turned to "Off".
I
0
The settings will remain saved in the
case of a power failure.
Settings
17