Chapter 3, Error Messages - Zibro Laser FF 95 Operating Instructions Manual

Chapter 3, ERROR MESSAGES

ERROR CODE
E-0
E-2
E-6
E-8
E-12
E-13
E-22
-- : --
Hi
Lo
47
INFORMATION
Power interrupted.
Ignition safety feature is activated.
Extinguished during operation.
Blower motor malfunction.
Overheating safety feature is activated.
Burner thermistor malfunction
Excess fuel in the burner
Ignition failure three times
No fuel.
Timer is not setting.
Room temperature is higher than 35°C.
Position of room temperature sensor is
not correct.
Room temperature is lower than -10°C.
Room thermistor malfunction or
disconnected.
WHAT TO DO
Re-ignite the heater
Contact your dealer
Contact your dealer
Contact your dealer
Clean the air filter and
remove dust.
Contact your dealer
Contact your dealer
Contact your dealer
Refill removable tank.
Set the timer.
Check the position of room
temperature sensor.
Check the position of room
temperature sensor.