Page 2
Introduction Congratulations on the purchase of your NVR system. This quick start guide will assist you on getting your system up and running as soon as possible. We recommend that you connect everything and give it a try before you do a permanent installation, to make sure nothing was damaged during shipping.
Make sure your NVR is unplugged from its power source, and unscrew the four screws at the cover at the bottom panel with a Philips screw driver. Slide the cover off, and connect the SATA power and data cables from the NVR to the corresponding ports on your HDD.
Page 5
NVR Power Connector - This is where you connect the NVR's DC power supply. Mini USB power connector - This is where you connect the cameras in the kit to DC power supply. Connecting Your NVR System Fasten the four WiFi antennas to the back of the included four cameras.
Page 6
Set up with Mobile Devices Mobile setup is necessary before you actually install the cameras to your target area. It helps you connect the NVR and cameras to your WiFi network, and also allows you to access your NVR system from any location with available network using any Android or iOS mobile devices with our “MeShare”...
Page 8
Log in and press the Tap “Ready” to start Device option located on the searching the NVR devices bottom of the screen. in your network. ZM-SS7008D4 (+08:00)Beijing,Urumqi,chongqing,H... Found the NVR devices. Name your device and Tap “ADD”. tap” Finish”.
Page 9
Now the app will pop out a message that “this kit has wireless cameras that need to 5454SDBDF455655 be configured”, tap “OK” (in Android) or “Set up wireless (+08:00)Beijing,Urumqi,chongqing,H... cameras” (in iOS) to connect with the wireless IP cameras in the kit.
Page 10
Now the NVR will start WiFi connection searching. The result will be shown as a completed circle. For the kit with four cameras, the circle will show four cameras are connected successfully. Click “Finish” to finish the mobile setup.
Page 11
Now the setup has been successfully finished.
Mounting the Cameras Set up the NVR system and find the best mounting location based on the live view from your smartphone. Make sure that your cameras are within range of your WiFi network. Line the camera bracket against the wall and mark the appropriate holes.
Page 13
Fasten the bracket to the camera (bracket not together with camera body when out of factory). You can rotate the whole bracket basing and adjust the camera to a direction with a better view. Connect the supplied power adapter to the USB power port on cable attached to your camera body and then plug the power adapter into an electrical outlet.
Viewing Options MeShare Web App You can also view your device on any computer using MeShare’s free web app. Simply use your MeShare username and password and log in to user.meshare.com. Now Compatible with MeShare! We have partnered with MeShare to bring you optional cloud services! The MeShare Cloud Service (MCS) allows you to: Record continuously and store the footage on our...
Page 15
Note: The password function is disabled by default. To ensure your security, it is necessary to set a strong password before continuing. Support Having difficulty? For more instructions, troubleshooting, support information, our knowledge base, the community forum, and other resources, please visit: http://www.zmodo.com/supports...
Connect with us! Like us on Facebook.com/Zmodo Scan the QR-code below! Follow us on Twitter @Zmodo Scan the QR-code below! Android is a trademark of Google Inc. Google Play is a trademark of Google Inc. Apple, the Apple Logo, and iPhone are trademarks of Apple Inc., registered in the U.S.
Need help?
Do you have a question about the ZM-KW0003-500GB and is the answer not in the manual?
Questions and answers