Blomberg CTE 30400 Installation Instructions Manual page 8

Figure 1�.
8
Figure 1�.
THE CONDUIT IS 3 FEET LONG
The junction box, must be located where it will
allow considerable slack in the conduit for
serviceability.
Important:
For solid surface material installations such as
x
Surel™ and Corian
manufacturer. Apply heat reflective tape such as
Scotch® Aluminum Foil Tape #425 or #427
around the cutout so that it folds over on the top
and sides.
Do not wrap the tape underneath the cooktop.
x
Be sure the tape extends beyond the outermost
flange of the cooktop. All corners should be
covered with tape.
Installation Manual
ENGLISH
WARNING
®
, consult with solid surface