Advertisement
Quick Links
INSTALLATION INSTRUCTIONS FOR PART 95-5818
F-150 2004 Heritage / F-150 1997-2003
Navigator 1997-2002/Blackwood 2001-2003
95-5818
KIT FEATURES
• Double DIN Head Unit Provision
• Stacked ISO Mounts Units Provision
NOTE: Major sub dash modifications
are necessary to use this dash kit. You
will need to trim the sub dash to gain
suitable depth and height.
KIT COMPONENTS
A) & B) (2) Double Din Trim Plates • C) Double Din Brackets
•
WIRING AND ANTENNA CONNECTIONS
(Sold Separately)
Wiring Harness:
• See www.metraonline.com for specific interface
A
Antenna Adapter:
• Not required
Dremel or Suitable Cutting Tool
• Panel Removal Tool • Socket Wrench
1-800-221-0932
© COPYRIGHT 2009-10 METRA ELECTRONICS CORPORATION
APPLICATIONS
FORD
Expedition 1997-2002
F650 2005-2008
LINCOLN
TOOLS REQUIRED:
•
Small Flat Blade Screwdriver
•
Metra 86-5618 Removal Keys
www.metraonline.com
C
B
Advertisement
Related Manuals for Metra Electronics 95-5818
Summary of Contents for Metra Electronics 95-5818
- Page 1 INSTALLATION INSTRUCTIONS FOR PART 95-5818 F-150 2004 Heritage / F-150 1997-2003 Expedition 1997-2002 Navigator 1997-2002/Blackwood 2001-2003 95-5818 KIT FEATURES • Double DIN Head Unit Provision • Stacked ISO Mounts Units Provision NOTE: Major sub dash modifications are necessary to use this dash kit. You will need to trim the sub dash to gain suitable depth and height.
- Page 2 - Double DIN/Stacked ISO Mount Units Provision ....2 *Note: Refer also to the instructions included with the aftermarket radio. 95-5818 NOWLEDGE IS Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.
- Page 3 (Figure C) Cut and remove obstructions in dash cavity. (Be careful not to cut into har- nesses or electronic components) (Figure D) Continue to kit assembly. CUT OUT CUT BAR 95-5818 DASH DISASSEMBLY EXPEDITION 1997-2002/ F650 2005-2008/ CUT BAR...
-
Page 4: Double Din/Stacked Iso Mount Unit(S) Provision
(Figure B) Re-connect the negative battery ter- minal and test the unit for proper operation. Continued on page 3. 95-5818 KIT/FINAL ASSEMBLY UNIT(S) PROVISION (A) Strip wire ends back 1/2" B) Twist ends together C) Solder D) Tape... - Page 5 *NOTE: When a Black wire is not present, ground radio to vehicle chassis. All colors may not be present on all leads due to manufacturer’s specifications. Enjoy your newly installed radio! 95-5818 KIT/FINAL ASSEMBLY FINAL ASSEMBLY Right Front (+) ... . Gray Right Front (-).
- Page 6 95-5818 NOTES...
- Page 7 95-5818 NOTES...
- Page 8 95-5818 INSTRUCTIONS www.metraonline.com 1-800-221-0932 REV. 06/08/10 © COPYRIGHT 2009-10 METRA ELECTRONICS CORPORATION INST95-5818...
Need help?
Do you have a question about the 95-5818 and is the answer not in the manual?
Questions and answers