Hands-Free Mode Settings; Power Saving Mode Settings; Accessory Settings - Samsung Galaxy S III User Manual

Hands-free Mode Settings

Configure settings for using your phone without touching it, such as announcing incoming calls and
reading out messages.
1. Press
and then tap
2. Tap Hands-free mode, and then tap the ON/OFF switch beside Hands-free mode to turn the
feature On or Off.
3. After you turn the feature On, you can configure options:
Incoming call: W hen enabled, your phone reads out the caller's information when you
l
receive a call.
Message: W hen enabled, your phone reads out the sender's information when you receive
l
a message.
Alarm: W hen enabled, your phone reads out alarm information when an alarm sounds.
l
Schedule: W hen enabled, your phone reads out event information when a reminder
l
sounds.

Power Saving Mode Settings

Configure Power saving mode settings to conserve battery power.
1. Press
and then tap
2. Tap Power saving mode to configure options:
Tap the ON/OFF switch next to Power saving mode to turn the mode On or Off. Power
l
saving mode must be turned On to configure settings.
CPU power saving: W hen enabled, the maximum performance of the device's CPU
l
(Central Processing Unit) is disabled to conserve battery power. Tap the check box beside
the option to ewnable or disable it.
Screen power saving: W hen enabled, the frame refresh rate and brightness level are
l
reduced to conserve power. Tap the check box beside the option to enable or disable it.
Turn off haptic feedback: W hen enabled, Haptic feedback is disabled to conserve battery
l
power. Tap the check box beside the option to enable or disable it.
Note: Tap Learn about Power saving mode to view information about these settings.

Accessory Settings

Configure your device's behavior when it is connected to an optional dock (not included).
1. Press and then tap
2. Tap Accessory to configure settings:
Settings
> S ettings > M y device.
> S ettings > M y device.
> S ettings > M y device.
120