File Bay Device - NEC Versa LXi Service And Reference Manual

!

File Bay Device

Follow these steps to remove a device from the file bay.
Close the LCD panel and turn the system over.
1.
Locate and remove the securing screws on the bottom of the unit.
2.
A – File Bay Device
Slide the device out of the file bay.
3.
Once the drive is disconnected, use the lever to lift the drive out of the system. Once
removed, only handle the drive by its sides. To avoid damaging the drive, do not hold
the drive by the top and bottom.
Lifting the drive out of the bay
Removing the screw
B – Screw
Disassembly and Reassembly 3-15