Sony PMW-F55 Operating Instructions Manual page 75

Warning indication Buzzer
on LCD/viewfinder
Backup Battery End
Please Change
1)
Unknown Media(A)
Please Change
Media Error
1)
Media(A) Needs to be
Restored
Media Error
Cannot Record to
1)
Media(A)
Media Error
1)
Cannot Use Media(A)
Will Switch Slots Soon
No Clip
1)
Cannot Use Media(A)
Unsupported File System
Same File Already Exists
1)
Change Media(A)
Media Error
Playback Halted
1)
Media(A) Error
Media Reached
Rewriting Limit
1)
Change Media (A)
Reached Clip Number
Limit
Copy Completed: xx/xx
Not Enough Capacity
Copy Completed: xx/xx
Reached Duplication
Limit
Copy Completed: xx/xx
REC Cause and measures
lamp
The remaining power of the backup battery is insufficient.
Replace the battery pack.
A partitioned memory card or one that contains recorded clips
exceeding the number permitted with this camcorder is loaded.
This card cannot be used with this camcorder. Remove it and
load a compatible card.
An error occurred with the memory card. The card requires
restoration.
Remove the card, load it again, and restore it.
Recording cannot be done, because the memory card is
defective.
Because playback may be possible, it is recommended to
replace it with another card after copying the clips, as
required.
Neither recording nor playback can be done, because the
memory card is defective.
It cannot be operated with this camcorder. Replace it with
another card.
This is an advanced notice that the camcorder will switch from
the current memory card to the other memory card for
continuous recording.
There are no clips in the memory card.
Check the selected card.
A card of a different file system or an unformatted card was
inserted. It cannot be used with this camcorder.
Replace it or format it with this camcorder.
A clip with the same name exists in the memory card to which
you want to copy.
Replace the card.
An error occurred in reading data from the memory card, and
playback cannot be continued.
If this frequently occurs, change the memory card after
copying the clips, as required.
Recording cannot be done, because an error occurred with the
memory card.
If this frequently occurs, change the memory card.
The memory card comes to the end of its service life. Make a
backup copy and replace the card with another one as soon as
possible. Recording/playback may not be performed properly
if you continue to use the card.
For details, refer to the operating instructions of the memory
card.
The maximum number of clips for 1 memory card is reached,
so copying cannot continue. (xx/xx indicates the completed
copies.)
Replace the card.
There is not enough capacity for copying. (xx/xx indicates the
completed copies.)
Replace the card.
There are already 10 or more clips with the same name as the
clip that you want to copy, so copying cannot continue. (xx/xx
indicates the completed copies.)
Replace the card.
Error/Warning Indications 75