1
2
1.
AUDIO IN CH1/AUDIO IN CH2
(external audio input selection) switches
Switch input signal (external microphone,
external audio device, etc.).
supported by future upgrade
2.
AUDIO IN (CH-1, CH-1/2) /AUDIO IN
(CH-2, CH-3/4) connectors
Input external microphone or audio
equipment signals.
3.
CH1 MIC +48V/OFF, CH2 MIC +48V/
OFF (external microphone input
selection) switches
Supply phantom power (48 V) to the external
microphone when you set this switch to
"MIC +48V."
Left side connector panel
1
2
3
4
5
1.
TC IN/OUT (timecode input/output
selection) switch (page 68)
2.
TC (timecode input/output) connector
(BNC type) (page 68)
3.
GENLOCK IN connector (BNC type)
(page 68)
4.
TEST OUT (analog video output)
connector (BNC type) (page 66)
5.
SHUTTER connector (BNC type)
To be supported by future upgrade
Bottom
3
is
(AES/EBU
.)
1.
.
1
Accessory mounting screw holes
Type of screw: 1/4-20UNC (× 3)
Type of screw: 3/8-16UNC (× 3)
Length of engagement: 9 mm
3
(
/
inch) or less
8
Note
Do not apply excessive force to the mounted
accessory. It may damage the screw thread.
Location and Function of Parts
13