Cruise Control - Mitsubishi Colt Owner's Manual

Starting and driving

Cruise control*

Cruise control is an automatic speed control system
that keeps a set speed. It can be activated at about
40 km/h (25 mph) or more.
CAUTION
l When you do not wish to drive at a set
speed, turn off the cruise control for safety.
l Do not use cruise control when driving
conditions will not allow you to stay at
the same speed, such as in heavy traffic
or on roads that are winding, icy, snow-
covered, wet, slippery, on a steep down-
hill slope.
l On vehicles with M/T, do not move the
gearshift lever to the "N" (Neutral) posi-
4
tion while driving at a set speed without
depressing the clutch pedal. The engine
will run too fast and might be damaged.
NOTE
l Cruise control may not be able to keep your
speed on uphills or downhills.
l Your speed may decrease on a steep uphill.
You may use the accelerator pedal if you
want to stay at your set speed.
l Your speed may increase to more than the
set speed on a steep downhill. You have to
use the brake to control your speed. As a re-
sult, the set speed driving is deactivated.
4-32
Cruise control switches
E00609100623
A- "ON OFF" switch
Used to turn on and off the cruise control.
B- "COAST SET" switch
Used to reduce the set speed and to set the de-
sired speed.
C- "ACC RES" switch
Used to increase the set speed and to return to
the original set speed.
D- "CANCEL" switch
Used to deactivate the set speed driving.
NOTE
l When operating the cruise control switches,
press the cruise control switches correctly.
The set speed driving may be deactivated au-
tomatically if two or more switches of the
cruise control are pressed at the same time.
To activate
1. With the ignition switch in the "ON" posi-
tion, press the "ON OFF" switch (A) to turn
on the cruise control. The "CRUISE" indica-
tion lamp in the meter cluster will come on.
NOTE
l If the cruise control is on when the ignition
switch is turned to the "LOCK" or "ACC" po-
sition, cruise control will be on automatically
the next time you start the engine. The
"CRUISE" indication lamp will also be on.
l
If the battery voltage is insufficient, the mem-
ory data for the cruise control may be erased.
As a result, the "CRUISE" indication lamp
may not come on when you restart the engine.
If this happens, press the "ON OFF" switch
once again to turn on the cruise control.
E00609300700