Details Of Expressbuilder; Storage Media - NEC R120d-1E N8100-1954F Maintenance Manual

Chapter 2 Convenient Features
5.

Details of EXPRESSBUILDER

EXPRESSBUILDER helps you to install Windows and check the server. Bundled software and documents are
provided in EXPRESSBUILDER.
5.1

Storage Media

EXPRESSBUILDER can be operated from the following two ways.
DVD:
EXPRESSBUILDER DVD is supplied as standard. This is used in the following two ways:
(1) Insert the DVD to the optical disk drive of the server, and then reboot by turning off and on the server or
by pressing <Ctrl> + <Alt> + <Delete> keys.
Boot Selection Menu shown in Chapter 2 (5.2 Menu) - (1) Boot Selection Menu appears.
(2) Insert the DVD into a computer on which Windows is running.
Autorun Menu shown in Chapter 2 (5.2 Menu) - (4) Autorun Menu appears.
Internal Flash Memory (optional):
If Internal Flash Memory is installed in the server, EXPRESSBUILDER can be started from it.
Press <F3> key when the following message appears on POST screen. At this time, be sure to remove a
bootable disc from the optical disk drive.
Press <F2> SETUP, <F3> Internal Flash Memory, <F4> ROM Utility, <F12> Network
If <F3> Internal Flash Memory is not displayed on POST screen, make sure that Internal Flash
Memory is connected correctly by referring to a) in Chapter 2 (5.4 Configure EXPRESSBUILDER Settings) -
(2) Manage Internal Flash Memory.
When EXPRESSBUILDER is started from Internal Flash Memory, Boot Selection Menu shown in Chapter 2
(5.2 Menu) - (1) Boot Selection Menu appears.
Tips
Remove other removable media before starting EXPRESSBUILDER.
Note
It is necessary to copy EXPRESSBUILDER to Internal Flash Memory first except
BTO (Built to order). For details, refer to (2) Manage Internal Flash Memory in
Chapter 2 (5.4 Configure EXPRESSBUILDER Settings).
Express5800/R120d-1E, R120d-2E Maintenance Guide
5. Details of EXPRESSBUILDER
113