Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Rosewill CHALLENGER-S
Summary of Contents for Rosewill CHALLENGER-S
-
Page 5: Accessory Box
12x Screw - A 5.25/3.5 Device 2.5 SSD/HDD 9x Screw - B 3.5 HDD Power Supply 4x Screw - C Add-in Card 1x Buzzer Motherboard Cable 3x Cable Tie Management 1x Nut Setter Motherboard © All rights reserved by Rosewill... -
Page 6: Installation Guide
- Fan Facing Downwards: Make sure that there is enough room for air-intake between the bottom of case and the surface where the case is located. - Clean the dust filter regularly to ensure adequate airflow. © All rights reserved by Rosewill... - Page 7 * screw A 3-1 Place the motherboard standoffs based on manufacturer specs. 3-2 Secure the motherboard with screw-A. 3-3 Unscrew to remove the slot cover. 3-4 Install the add-in card and secure with screws. © All rights reserved by Rosewill...
-
Page 9: Install 3.5"/2.5" Hdd/Ssd
5-2 Remove the thumbscrew to retrieve the 2.5” bay. until the latch clicks. 5-3 Secure the 2.5” SSD/HDD with screw-A. 5-4 Install back with the thumbscrews. 6. System Ready 6-1 Slide the side panels back and secure with thumbscrews. © All rights reserved by Rosewill... - Page 10 CASE CHALLENGER- User Manual 7. Clean the dust filters 7.1 Clean the dust filter regularly to ensure adequate airflow for power supply unit. (Unscrew to remove the top dust filter.) © All rights reserved by Rosewill...
- Page 11 Insturction of installing 120mm water cooling radiator in the front : a. Remove the front panel. b. Unscrew to remove the 2.5” SSD/HDD tray on the bottom of the 5.25” cage. c. Secure the radiator with screws and put the front panel back. © All rights reserved by Rosewill...
Need help?
Do you have a question about the CHALLENGER-S and is the answer not in the manual?
Questions and answers