Adding A User (Local User List) - Kyocera ECOSYS M6530cdn Operation Manual
Hide thumbs
Also See for ECOSYS M6530cdn:
- Operation manual (186 pages) ,
- Printer driver user manual (99 pages) ,
- Service bulletin (11 pages)
Table of Contents
Advertisement
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Adding a User (Local User List)
This adds a new user. You can add up to 100 users (including the default login user name).
NOTE
By default, one of each default user with machine administrator rights and administrator privileges is already stored.
Each user's properties are:
Machine Administrator
User Name:
DeviceAdmin
Login User Name:
3000
Login Password:
3000
Access Level:
Machine Administrator
Administrator
User Name:
Admin
Login User Name: Admin
Login Password:
Admin
Access Level:
Administrator
* Upper case and lower case letters are distinguished (case sensitive).
It is recommended to periodically change the user name, login user name and login password regularly for your
security.
1
Display the screen.
1
[System Menu/Counter] key > [▲] [▼] key > [User/Job Account] > [OK] key
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Login User Name:
Login Password:
2
[▲] [▼] key > [User Login Set.] > [OK] key > [▲] [▼] key > [Local User List] > [OK] key >
[Menu] > [▲] [▼] key > [Add User] > [OK] key
3000
3000
9-6
- Quick Links:
- System/Network
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the ECOSYS M6530cdn and is the answer not in the manual?
Questions and answers
It's saying close scanner unit
To fix the "close scanner unit" error on the Kyocera ECOSYS M6530cdn, ensure that the scanner unit is properly closed. Check if it is fully latched and there are no obstructions preventing it from closing completely. If the error persists, turn the machine off and on to reset it. If the problem continues, contact your service representative.
This answer is automatically generated
Close scanner unit
To close the scanner unit on the Kyocera ECOSYS M6530cdn, ensure that the new toner container is installed correctly. If the scanner unit does not close, check the toner container installation and adjust it if needed.
This answer is automatically generated
Where can I locate the scanner unit on m6530cdn
The exact physical location of the scanner unit on the Kyocera ECOSYS M6530cdn is not specified in the provided context.
This answer is automatically generated