Connecting To A Wireless Network - HCL ME 54 series User Manual

User's Guide
If you have included an PCIe
installing the driver.
Use the Fn + F2 key combination to toggle power to the Wireless LAN module. Make sure you install the
drivers in the order indicated.
Warning:
Wireless Device Operation Aboard Aircraft: The use of any portable electronic transmission devices aboard
aircraft is usually prohibited. Make sure the module(s) are OFF if you are using the computer aboard aircraft. Use
the Fn + F2 key combination to toggle power to the WLAN module, and check the indicator to see if the module is
powered on or not (or) use aeroplane hot key to switch off Wireless and Bluetooth simultaneously.

Connecting to a Wireless Network

Make sure the Wireless LAN module is turned on.
1. Click the taskbar wireless icon
click Connect to a network).
2. In the Show list, click to choose Wireless from the drop-down menu.
Wireless LAN card make sure that the Wireless LAN module is on before
, and then click Connect to a network (or right click the icon
Using the Notebook PC
, and then
4-14