Touch Response; Transpose; Piano; Voices And Effects - Classic Cantabile GP 500 User Manual

Voices and Effects

Touch Response

This function allows you to activate the dynamic level
when playing the keyboard.
1
Press the [TOUCH] button, LCD lightens the TOUCH flag
and displays touch response type 00 Touch briefly.
2
4 setting are available for selection, TOUCH 001/002/003/
OFF, the default is 002. You can change the current setting
by pressing the [TOUCH]
3
If the type is set as "OFF" the "TOUCH" flag goes out,
there is no touch response to piano.

Transpose

You can shift the pitch of the entire keyboard with the
TRANSPOSE function by adjusting the pitch in semitone
steps.
1
Press the [TRANSPOSE +]
the first time to enter the Transpose setting mode, LCD dis-
plays current transpose value briefly.
2
Press them again and later, the value will increase or decr-
ease by degrees, also you can use the
button or the DIAL to adjust it, ranging from -12 to +12
semitones, the default value is 000.
3
In TRANSPOSE setting, pressing the
[TRANSPOSE -] button simultaneously will set the value to
default.
If you don't press any button for 5 seconds after entering the tran-
spose setting mode, it will quit this menu automatically.

Piano

1
Press the [PIANO] button to enter the PIANO mode, the
chord mode will be disabled automatically, the full range on
the keyboard is piano voice.
2
Press the [PIANO] button again to exit the current mode.
Press the [VOICE] + [STYLE] [SONG] [VOICE]
direct select button, or the
button, you can exit the piano mode.
3
You can select and play the style by pressing the
and the direct select button, LCD will then display the style
name. Accompaniment control will respond in effect as
usual only with the drum tracks.
18
"
" 2 "
button.
,
or [TRANSPOSE -] button for
[+/YES] and
[TRANSPOSE +]
, , and the
[DUAL] [SPLIT] [M1] [M6] , , ~
[STYLE]
"
DUAL SPLIT
DSP TOUCH
- TRANSPOSE +
[-/NO]
- TRANSPOSE +
and
PIANO METRONOME
DUAL
SPLIT
TOUCH
DSP
DUAL
SPLIT
TOUCH
DSP
DUAL
SPLIT
TOUCH
DSP
TOUCH