Dremel 300 Series Instructional Safety Manual page 17

DM 2610925781 5-05.qxd
For availability of all accessories and attachments, refer your local hardware, hobby or home
center. Or contact Dremel Consumer Service at:
Use only Dremel™, high-performance accessories. Other accessories are
WARNING
!
not designed for this tool and may lead to personal injury or property
damage.
Drywall Cutting Bit
When using a template (outlet box) behind
the drywall, cut in a counterclockwise direc-
tion.
High Speed Router Bits
For routing, inlaying and mortising in wood
and other soft materials. Use only with
Dremel™ Router Attachment #330 or
Shape/Router Table #231.
Mandrels
A mandrel is a shank with a threaded or
screw head used with polishing accessories,
cutting wheels, sanding discs and polishing
points. The mandrel is a permanent shank,
allowing for replacement of the worn head
when necessary.
Screw Mandrel
For use with the felt polishing
tip and felt polishing wheels.
Aluminum Oxide Grinding
Stones (red/brown)
These grinding
come round, pointed or flat
and are made of aluminum
oxide. Use them for every possible grinding
operation: sharpening lawn mower blades,
screwdriver tips, knives, scissors, chisels and
other cutting tools. Use to remove flash from
metal castings, deburring any kind of metal.
These grinding stones can be resharpened
with a dressing stone. In machine shops,
high speed drills and cutters are normally
ground with aluminum oxide wheels.
5/12/05 10:31 PM
ACCESSORIES
1-800-437-3635
1/8" shank
stones
1/8" shank
17
Page 17
or at www.Dremel.com.
Tile Cutting Bit
For use wall tile, cement board and plaster.
Start the bit into the material at a 45° angle
and then slowly bring it to a 90° angle to
begin the cut.
Multipurpose Cutting Bit
For use in wood, plastics, drywall, fiberglass,
vinyl or aluminum siding, acoustical tile and
laminates.
Start the bit into the material at a 45° angle
and then slowly bring it to a 90° angle to
begin the cut.
Small Screw Mandrel
Mandrel has a small screw
at the tip and is used with
emery and fiberglass cutting
wheels, sanding discs and
polishing wheels.
Threaded Tip Mandrel
Mandrel has a threaded tip
which threads into the polish-
ing point accessory #427.
Silicon Carbide Grinding
Stones (blue/green)
Tougher than aluminum oxide
points, these are made especially for use on
hard materials such as glass and ceramics.
Diamond Wheel Points
Used for fine detail work on
wood, jade, ceramic, glass and
other hard material. Bits are
covered with diamond parti-
cles.
1/8" shank
1/8" shank
1/8" shank
3/32" shank