Manual Dubbing (From Dvd To Vcr) - JVC DR-MV1S Instructions Manual

EDITING
68
EN

Manual Dubbing (From DVD To VCR)

Dubbing A Part Of A Disc
You can dub the selected scenes on a tape to the DVD disc,
starting and stopping wherever you wish.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
VCR/DVD
VCR/DVD
3
8
REC MODE
9 5
4
8 73
SAT
1 2 3
4 5 6
7 8 9
0
PROGRESSIVE SCAN
4
5
9
7
1
For DVD deck
Load a disc you want to dub.
For VCR deck
Load a cassette with the record safety tab intact.
2
Press }DVD to select the dubbing direction.
● "}DVD" lights up on the front display panel.
3
Prepare the DVD deck for dubbing.
A Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
B Locate the point from where you want to start dubbing, then
pause playback by pressing the following buttons: 4, 5, 3,
} DVD
8, 9
4
Prepare the VCR deck for dubbing.
A Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
B Press REC MODE repeatedly to set the recording mode.
C Press and hold 9, then press 7 so that the VCR deck enters
the Record Pause mode.
5
Press and hold DUB for more than 2 seconds to start the
DUB
dubbing.
6
Press 8 to stop recording on the VCR deck. Then press VCR/
DVD, and press 8 to stop playback on the DVD deck.
NOTES:
● It is not possible to start dubbing if the unit retains a memory of the
resume points. Press 8 twice to clear the resume points.
● There may be a discrepancy of several seconds between where you
intend dubbing to start, and where it actually stars.
● The superimposed indication during the operation or dubbing is not
recorded.
● When the end of the tape is reached during dubbing, the tape is
ejected and both deck stops.
● When the progressive mode is set, "}DVD" does not light up on the
front display panel. Press PROGRESSIVE SCAN so that video
output indicator (
● It is not possible to perform other operations like Live Memory
Playback. Check the recorded programme on the disc after dubbing.
) lights off on the front display panel.