Advertisement
Advertisement
Table of Contents
Related Manuals for Black & Decker XTS1660
Summary of Contents for Black & Decker XTS1660
- Page 1 Ireland Australia New Zealand...
- Page 2 12 14 15...
- Page 3 32 13...
-
Page 4: Intended Use
Intended use b. Use safety equipment. Always wear eye protection. Your Black & Decker saw has been designed for sawing wood Safety equipment such as dust mask, non-skid safety and wood products. shoes, hard hat, or hearing protection used for This tool is intended for consumer use only. - Page 5 g. Use the power tool, accessories and tool bits etc., – when the blade is pinched or bound tightly by the kerf in accordance with these instructions and in the closing down, the blade stalls and the motor reaction manner intended for the particular type of power drives the unit rapidly back toward the operator;...
- Page 6 Safety instructions for saws with a pendulum blade guard Do not use blades of larger or smaller diameter than Check lower guard for proper closing before each recommended. For the proper blade rating refer to the use. Do not operate the saw if lower guard does not technical data.
- Page 7 Fit the outer washer (15) on the spindle, with the raised Adjusting the depth of cut (fig. E) part pointing away from the saw blade. The depth of cut should be set according to the thickness of Insert the blade retaining screw (14) into the hole. the workpiece.
-
Page 8: Maintenance
Continuous satisfactory operation depends upon proper tool care and regular cleaning. Technical data Warning! Before performing any maintenance, switch off and XTS1660 unplug the tool. Input voltage Power input W 1,600 Regularly clean the ventilation slots in your tool using a... -
Page 9: Ec Declaration Of Conformity
EC declaration of conformity The extended warranty does not apply if: XTS1660 Proof of purchase and the original extended warranty Black & Decker declares that these products conform to: certificate is not produced. 98/37/EC, 89/336/EEC, EN 60745, EN 55014, EN 61000... - Page 12 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. 09 579 7600 81 Hugo Johnston Drive Fax 09 579 8200 Penrose, Auckland, New Zealand United Kingdom Black &...