Page 2
Congratulations! On the purchase of your Black & Decker saw. To ensure the best results from your saw please read these safety and usage instructions carefully. If you have any questions or queries after reading this manual please do not hesitate to call your local service and information centre (the number is towards the back of this manual).
The Black & Decker guarantee Accessories Technical data Features Removal & refitting the blade Removing the blade Fitting a blade Operating your Scorpion Saw Recommended Materials Cleaning EC declaration of conformity Service Sheet Black & Decker phone numbers and addresses Guarantee card...
Do not use the tool for purposes not intended; for example, do not use a circular saw or Scorpion Saw to cut tree limbs or logs. • Dress properly. Do not wear loose clothing or jewellery as they can be caught in moving parts.
Note: Double insulation does not take the place of normal safety precautions when operating the tool. The insulation system is for added protection against injury resulting from a possible electrical insulation failure within the tool. ELECTRICAL SAFETY Be sure the supply is the same as the voltage given on the rating plate.
Before you start cutting make sure that the area you are going to cut is clear of all obstacles particularly on the reverse side of the cut. If you use the saw with one hand always ensure your free hand is away from the cutting area. KS890E REMOVAL &...
Also, do not use petrol, turpentine, lacquer or paint thinners or similar products. Never let any liquid get inside the tool and never immerse any part of your Scorpion Saw into liquid. EC DECLARATION OF CONFORMITY We declare that unit: KS890E conforms to...
Page 10
Australia WALT Industrial Power Tool Company 7 Clarice Road Box Hill, Victoria 3128 New Zealand Black & Decker 81 Hugo Johnson Drive Penrose, Auckland, New Zealand South Africa Black & Decker South Africa (Pty) Ltd Physical address: 39 Commerce Crescent Eastgate, ext.
Need help?
Do you have a question about the KS629-638SE and is the answer not in the manual?
Questions and answers