Saving Settings - Buffalo TeraStation TS5800D User Manual

ory device. Use this function for backing up settings and to copy settings to a new TeraStation.
Notes:
• Make a note of the hard drive configuration (number of hard drives, RAID, LVM, etc.) of the TeraStation where
the settings were saved. Make sure that any TeraStation that you apply these settings to has exactly the same
hard drive configuration before you apply the settings. If the drive configuration is different, you make get
unexpected results.
• The settings below cannot be saved or recovered:
[File Sharing]
- USB drive and memory cartridge shared folder information
[Drives]
- All settings in [Drives]
- All settings in [RAID] - [Options] - [RAID Array Settings]
- All settings in [LVM]
- All settings in [iSCSI]
- USB drive and memory cartridge information
[Network]
- All settings in [IP Address]
- All settings in [Port Trunking]
[Backup]
- All settings in [Failover]
[Management]
- All settings in [Name]
- All settings in [UPS Sync]
- All settings in [SSL]
- Display language in the Web Admin interface

Saving Settings

1
In the TeraStation's Web Admin interface, click [Management].
2
Click next to [Restore/Erase].
3
Insert the USB memory device into a USB port on the TeraStation.
Notes:
• If using a TeraStation model with a USB 3.0 port, do not connect the USB memory device where the settings will
195