Changing Basic Programming; Configuring The Favourites List; Calling Up Programme List Organizer - TechniSat digit mf4-s e Operating Instructions Manual

Use the arrow keys up/down to select the desired timer type.
>
> To accept the timer type, confirm by pressing OK.
> When you have completed the programming, press the green function key Accept to
accept the data into memory.
Please note!!!
Please ensure that the receiver has acquired the time. This will be shown in the display while
the unit is in stand-by mode. If this is not the case, leave the receiver switched on to a major
programme such as ZDF for approximately 30 seconds, so that the receiver can acquire the
current time.
Now the time should be shown in the display while the receiver is in stand-by mode.
8 Changing the basic programming

8.1 Configuring the Favourites list

This chapter describes how you can change the pre-programming of your digital receiver as
well as the Favourites programme list in accordance with your own preferences. This function
is also required to sort newly found programmes into the programme list after a programme
scan has been performed.
In this regard you should know the following: your receiver is equipped with two programme
lists, the Favourites list and the Total list. The Favourites programme list includes all the
programmes you have accepted into the list according to the procedure described
below. The Total list includes all programmes.
8.1.1 Calling up TV list organiser
To customise the Favourites list, proceed as follows:
> Press the Menu key to call up the Main Menu.
> Use the arrow keys up/down to mark the line TV list organiser, in order to work
on the TV list, or Radio list organiser, in order to work on the radio list.
Confirm by pressing OK.
>
The programme list management required to work on the respective TV or Radio list
will be displayed. TV or Radio list will be displayed on the right half of the screen. This
is now active, with the currently selected programme being marked. The alphabetically
sorted Total list will be displayed on the left half of the screen.
The Total list includes all available programmes.
Press the blue function key to move the marker to the Total list. This is now active.
>
> Press the blue function key again to display a selection window. Here you have the
option of sorting the Total list according to various selection criteria (e.g. all
programmes, all free-to-air, all new programmes, all programmes found, all English
programmes, etc.) or sorted by Provider/List.
> Use the arrow keys up/down to select the desired programme list (e.g. Total list).
32