3.12 [1-1] Slot—Port Property - LCO Port—Connection Command
3.12 [1-1] Slot—Port Property - LCO Port—
Connection Command
Commands for the LCO ports can be programmed.
INS
Puts the port in service.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
3.12 [1-1] Slot—Port Property - LCO Port—Connection Command
Programming Manual References
3.11 [1-1] Slot—Port Property - LCO Port
Feature Manual References
None
OUS
Takes the port out of service. This enables a temporary non-use of the port, for example, for the purpose of
repair.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
3.12 [1-1] Slot—Port Property - LCO Port—Connection Command
Programming Manual References
3.11 [1-1] Slot—Port Property - LCO Port
Feature Manual References
None
120
PC Programming Manual
Document Version 2008-11