Page 7
MPCB (2) Bend the middle case, then be made the hook release. Hold the battery connector to take out MPCB from middle case.
Page 8
KEYPAD FPC、KEYPAD MODULE Bending the middle case while push the behind keypad module. It’s easy to take out the Keypad FPC. Take out the Keypad Module.
Page 9
QWERTY KEY It’s easy to take out the Qwerty Key.
KEYPAD COVER Use the pick to pry the hook The other side the same release from middle case.
Page 11
QWERTY KEY It’s easy to take out the Qwerty Key.
Page 12
LCM COVER The finger press the LCM cover with force. Then push the LCM cover to the leader direction. The LCM cover is separated from middle case. Take out the LCM cover.
LCD PANEL Bend the middle case, while push the panel in opposite direction. Be made the hook release from panel. Be careful don’t remain the fingerprints on the panel. Take out the LCD panel.
Page 17
ANTENNA COVER Use the pick to pry antenna cover surround...
Page 18
SCREWS on the INNER FRAME Release the 2 screw at the top inner frame...
Page 19
LCM COVER The finger press the LCM cover with force. Then push the LCM cover to the leader direction. The LCM cover is separated from middle case. Take out the LCM cover.
Need help?
Do you have a question about the Treo 500 and is the answer not in the manual?
Questions and answers