Setup (Smtp Mail Server/Pop3 Client) - Panasonic Workio DP-180 Operating Instructions Manual

To install your machine as SMTP Mail Server, the following network parameters need to be programmed on your network
and on your machine.
• TCP/IP Address of your machine
• TCP/IP Subnet Mask of your machine
• TCP/IP Address of the Default Gateway
• Host Name/Domain Name
• TCP/IP Address of the DNS Server (if not available, see note 2)
• Email Address of your machine (see note 1)
• Name or IP Address of the Default SMTP mail server
• SMTP Authentication Name (when the authentication with the SMTP server is required)
• SMTP Authentication Password (when the authentication with the SMTP server is required)
Email (from your machine to a PC) and Direct IFAX XMT Transmission
Email (from a PC to your machine) and Direct IFAX XMT Reception
NOTE
44
Internet Fax Features

Setup (SMTP Mail Server/POP3 Client)

ifaxuser@fax01.panasonic.com
Direct IFAX XMT
Gateway (Router)
popuser001@panasonic.com
ifaxuser@fax02.panasonic.com
ifaxuser@fax01.panasonic.com
Direct IFAX XMT
Gateway (Router)
popuser001@panasonic.com
1. To function as an SMTP mail server, your machine's email address must include its unique
Host name within your company domain. This unique Host name must be registered within
your network's DNS (Domain Name System) server.
Example: Internet_Fax@fax01.panasonic.com
2. By default the machine requires the IP Address of the DNS Server and prompts you to enter
the SMTP Server Name. If the DNS Server is not available, change the 23 (DNS server
address) of General Settings to "Invalid" (
ID Code,
SET
the IP Address of the SMTP Server.
SMTP
POP3
SMTP
ifaxuser@fax02.panasonic.com
COPY
23 DNS SERVER ADDR.
SMTP01.panasonic.com
(SMTP Mail Server)
POP02.panasonic.com
(POP Server)
SMTP01.panasonic.com
(SMTP Mail Server)
1
FUNCTION
). Then the machine will prompt you to enter
, Input
9
SET