Panasonic Workio DP-180 Operating Instructions Manual page 21

2
COLOR COLOR
REMOTE REMOTE
COPY COPY
5
The document(s) will be stored into memory with a file number
when sending from the ADF (Auto Document Feeder).
Then starts dialling the telephone number or connecting to the
LAN immediately after storing the first page. (See note 5)
The remaining page(s) continue to store into memory.
• If memory overflow occurs while storing documents, the remaining documents on the ADF
will be ejected. In the factory default setting (Fax Parameter No. 82 (QUICK MEMORY
XMT) is set to "Valid"), the machine will transmit the stored documents automatically
when transmitting to one station. If Fax Parameter No. 82 is set to "Invalid" and
transmitting to one station, the machine will change the transmission mode from Memory
to Direct XMT automatically when it detects that memory overflow will occur.
In other case, the machine will show "MEMORY FULL" and prompts you whether to
transmit the successfully stored documents or to cancel the transmission.
Press
seconds, the machine will start transmitting the stored documents.
If memory overflows while storing 1st page, use Direct Transmission.
• An Information Code will be displayed if the transmission has failed or no answer at the
receiving side after the last automatic redial.
The document stored for the transmission will be erased from the memory automatically
and the information code is printed for the transmission on the Communication Journal
(COMM. JOURNAL).
If you need to retain the incomplete documents even after the last redial, change the Fax
Parameter No. 31 (INC. FILE SAVE) to "Valid" in advance. (See page 141)
To retry the incomplete documents, refer to page 104.
NOTE 5. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling,
press
The dialling mode will be changed from Pulse to Tone after dialling the digit "/".
Ex: 9 PAUSE * (TONE) 5551234
6. This feature is called "Quick Memory Transmission". If you wish to store All the document(s)
into memory first before transmitting, change the Fax Parameter No. 82 (QUICK MEMORY
XMT) to "Invalid".
7. The "QUICK MEMORY TRANSMISSION" feature is disabled if multiple stations are set.
Selecting the desired
3
Transmission setting.
(See page 11)
6
"YES" to cancel or press
1
(TONE) (represented by a "/").
4a
4b
4c
4d
When an original is scanned from the Platen
Glass, the message "ANOTHER ORIGINAL?" is
shown.
Place another original, then press
.
START
Machine starts sending.
"NO" to transmit. If no action is taken within 10
2
21