Verify Firmware Update - Toshiba IP4100 Installation Manual

UPDATING THE FIRMWARE

Verify Firmware Update

IP4100 Install Sept., 2013
IPDECT/0306 followed by the date the file was created.
6. After upgrade has completed, Force Reboot each base, or reboot
entire chain. The handsets will link up after the Base station reboots.
7. If this is a new system installation the procedure is complete. If this is
an firmware update go to the next step.
8. Edit the configuration file saved on your PC in Step 1.
A. Use a text editor such as Notepad to open the config file.
B. Set the network roaming deregister to disable. Find:
%NETWORK_ROAMING_DEREGISTER%:0x01
C. Change it to: %NETWORK_ROAMING_DEREGISTER%:0x00
D. Save the config file.
9. Login a base station. Upload the edited config file to the base station.
10. On the Multicell menu select Forced Reboot chain.
1. On the front of the handset, press the Menu key.
2. Select Settings, then select Status.
3. Under SW version, make sure the three digits after the period match
the Required version, and the line directly below shows the current
date and time.
Verify Firmware Update
1-35