Technical Support Commands - D-Link DES-1228 Reference Manual

The Technical Support commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command
show tech_support
upload tech_support_to_TFTP
Each command is listed, in detail, in the following sections.
show tech_support
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Parameters
<ipaddr> <path_filename 64>
Used to show the information for technical support.
show tech_support
This command is especially used by the technical support personnel to dump the device's
overall operation information. The information is project dependent and includes the
following information.
Basic System information
system log
Running configuration
Layer 1 information
Layer 2 information
Application
OS status
None.
Only Administrator-level users can issue this command.
T S
ECHNICAL
284
C
UPPORT OMMANDS
43