Samsung OfficeServ 7200 Technical Manual page 22

OfficeServ 7200
TECHNICAL MANUAL
be lost. It is recommended that all programming is saved using Smart Media, MMC+ card,
Installation Tool or OfficeServ Manager application. Turning the switch OFF will set the
system to DEFAULT. To default the system keep this switch in the OFF position for 30
seconds. Switch to ON position before powering up the system.
ON (left)
4 DIGIT STATION NUMBERS
4 DIGIT STATION GROUPS
4 DIGIT TRUNK NUMBERS
Switches 1 through 4 select the country the system is installed in.

4
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Switch 5 is reserved.

These DIP switches will not take effect unless the switches are set in the wanted position

and the system memory is cleared manually by using the Memory Backup switch.
DIP SWITCH USE (S3)
SW8
SW7
SW6
RESERVED SW5
COUNTRY SELECT SW4
COUNTRY SELECT SW3
COUNTRY SELECT SW2
COUNTRY SELECT SW1
3 2
OFF OFF
OFF OFF
OFF ON
OFF ON
ON OFF
ON OFF
ON ON
ON ON
3.4
Home Page
OFF (right)
3 DIGIT STATION NUMBERS
3 DIGIT STATION GROUPS
3 DIGIT TRUNK NUMBERS
RESERVED
COUNTRY SELECT
COUNTRY SELECT
COUNTRY SELECT
COUNTRY SELECT
1 Country
OFF Korea
ON USA
OFF UK
ON Italy
OFF Australia
ON New Zealand
OFF Holland
ON Denmark
Table of Contents
INSTALLATION
PART 3 MAY 2010