Siemens A31003-D3000-M100-01-76A9 Administrator User Manual page 109

A31003-D3000-M100-01-76A9, 02-2013
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
Phone State
Ringer on Idle
In call
Ringer off Idle
In call
Group pickup visual alert defines the user action required to accept a pickup
call.
• If Prompt is selected, an incoming pickup call is signaled by the Pickup call?
prompt on the display and by the flashing Pick up key. As soon as the user
goes off-hook or presses the Speaker key or the Headset key, the pickup call
is accepted. Alternatively, the user can press the flashing Pick up key (if
configured) to accept the call.
• If Notify is selected, an incoming pickup call is signaled by the Pickup call?
prompt on the display and by the flashing Pick up key. To accept the call, the
user must confirm the alert by pressing the OK key or by pressing the flashing
Pick up key. The user can then either lift the handset or press the Speaker
key or the Headset key to accept the call.
• If FPK only (default setting) is selected, an incoming call is signaled only by
the flashing Pick up key. To accept the call, the user must press the flashing
Pick up key. The Pickup call? prompt is then shown on the display, and the
user can either lift the handset or press the Speaker key or the Headset key
to accept the call.
Group pickup
as ringer=yes
Ring tone
Speaker
Handset Ring tone
Speaker
Handset Open Beep Handset
listening and Speaker
Headset Ring tone
Speaker
Headset Open Beep Headset
listening and Speaker
Hands-free Beep Speaker
Nothing
Handset Nothing
Handset Open Beep Handset
listening and Speaker
Headset Nothing
Headset Open Beep Headset
listening and Speaker
Hands-free Beep Speaker
Administration
Feature Configuration
Group pickup
as ringer=no
Beep Speaker
Beep Handset
Beep
Handset and
Speaker
Beep Headset
Beep Headset
and Speaker
Beep Speaker
Nothing
Beep Handset
Beep Handset
and Speaker
Beep Headset
Beep Headset
and Speaker
Beep Speaker
109