Selecting The Propeller Shaft Shims - Yamaha F200C Service Manual

Shimming (counter rotation model) / Backlash (counter rotation model)
Calculation formula:
Forward gear shim thickness (T2) =
M0 – M
Available shim thicknesses:
0.10, 0.12, 0.15, 0.18, 0.30, 0.40, and
0.50 mm

Selecting the propeller shaft shims

1. Install the shim(s) 1, thrust bearing 2,
propeller shaft 3, taper roller bearing 4,
and claw washer 5, and then tighten the
ring nut 6 to the specified torque.
Ring nut wrench: YB-06578
Ring nut 6:
108 N·m (10.8 kgf·m, 78 ft·lb)
2. Measure the propeller shaft free play as
shown.
Propeller shaft free play:
0.25–0.35 mm (0.010–0.014 in)
69J1D11
Magnet flexible stand 7: YU-34481
Dial gauge 8: YU-03097
3. Select the propeller shaft shim(s) (T'4).
T´4
NOTE:
Add or remove shim(s), if the free play is out
of specification.
Available shim thicknesses:
0.10, 0.12, 0.15, 0.18, 0.30, 0.40, and
0.50 mm
Backlash
(counter rotation model)
Measuring the forward and reverse
gear backlash
1. Remove the water pump assembly.
2. Set the gearshift to the neutral position.
È
Shift rod push arm: YB-06052
1
2
3
S69J6705
4
5
6
6
7
8
9
6-54