Samsung OfficeServ 7100 Technical Manual page 145

OfficeServ 7100
TECHNICAL MANUAL
MMC: 329
DESCRIPTION:
This MMC is used to configure OfficeServ Connect groups. These groups allow you
to set up to 5 devices to ring simultaneously with the station. These devices can be
DLI, SLI, SIP, ITP, WIP, or MOBEX ports. Calls will follow the forwarding of the primary
station only. These groups are primarily used by the MOBEX feature to allow calls to
ring to both a keyset and a cell phone at the same time.
NOTE: Calls are delivered to all 5 devices simultaneously, however MOBEX ports will
experience a slight delay as the system must access and dial a trunk in order
to ring the cell phone. This delay typically 10 seconds or less.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION
1. Press TRANSFER 329.
Display shows first station port.
2. Press UP or DOWN to select a station
OR
Press RIGHT soft key to set members
3. Press UP or DOWN to select a member
OR
Press RIGHT soft key to set member directory
number
4. Press UP or DOWN to select next station
OR
Press TRANSFER to exit programming
DEFAULT DATA: NONE
RELATED ITEMS: OFFICESERV CONNECT FEATURE
[Available Only with v.4.30 or Higher]
Home Page
PROGRAMMING
PART 2 MAY 2009
RING GROUP
DISPLAY
[2001]RING GROUP
MEMBER 1 :NONE
[2001]RING GROUP
MEMBER 1 :NONE
[2001]RING GROUP
MEMBER 1 :NONE
[2001]RING GROUP
MEMBER 1 :4300
Table of Contents