Toshiba Strata DK 280 Installation Manual page 268

CALLER RECEIVES MUSIC-ON-HOLD OR RING
/
BACK TONE PER PROGRAM 10-3, LED 15 WHEN
AUTO ATTENDANT ROUTES CALL -
UT0 ATTENDANT ROUTES CALL (PROGRAM 09): -
I I I I r I
OIA
CAMP-ON BEEP 10 IPS FAST LED
FLASH LCD CAMP-ON DISPLAY
I I
DIAL IDLE DN
I l".W!
"DTNlhl
- FIGURE 43A
Note:
Y . I."..
PROGRAMS
lf the station has CF/NA set, the
station will ring for the CF/NA time
duration and then it will forward to
the forwarded destination. The
CF/NA destination station will ring
16 set and then route to @ if not
answered. A call will not forward a
second time.
14-4, -5, AND -6
PROGRAM 10-3
(16 SECOND WAIT FOR A2 I RRCS AVAILABLE)
TALK
GOT0 u
RING STATION PER
PROGRAM (81, 84,87)
FOR 40 I120 / 240 SEC.
PER PROGRAM 10-3 LEDs
DISCONNECT CD LINE
1 SECOND t
PROGRAM 24 Al
- Al"' ASSIGNMENTS TO
PSTU I RSTU I RDSU I PESU
A2 ANSWERS WITHIN
TIME-OUT 16 SECONDS
16 SECONDS
I
(FAULTY A2)
GO TO
I
Note:
(60 SECONDS MAXIMUM; RRCS REMAINS 4 SECONDS
A2 - A2"' - SECONDARY
AFTER ANNDUNCEMENT DISCONNECTS)
ANNOUNCEMENT DEVICE(S)
DK0347
Figure 6-45
Built-in Auto Attendant Flowchart (continued)
SMDR, relay control, alarm sensor, and door lock RSIU/RSIS/RMDS is installed, Program 76
functions will be active only on the PIOU or PIOUS assignments will override Program 03 (Code 41, 42,
PCB which is assigned the lowest Program 03 code and 43) assignments for SMDR, TTY, SMDI, and built-
(41, 42, or 43). RSSU only provides the TTY interface in maintenance modem. For more detailed information
for SMDI, local maintenance, or ACD MIS but not for
'SMDR, built-in maintenance modem or system OA.
regarding RSIU/RSIS/RMDS installation, see RSIU
installation in Chapter 4-Printed Circuit Boards and
With DK280 Release 3 and above an RSIU with RSIS
refer to Figure 7-38 in Chapter 7-Wiring.
and/or RMDS can be installed to provide the same
RS-232/modern functions as PIOU/PIOUS/RSSU
PCBs plus the open architecture port which is not
available on any other interface PCB. If
.
,
6-68
January 1996