GE MDS SD Series Reference Manual page 129

Table 20. Remote Commands—Quick Reference
COMMAND
_? When entered after a command in this list,
shows detailed information and allowable
(after a command)
entries
ALARMS Displays current alarm conditions by class
ASIG Alarm Signal Status/Configure. Allows view-
ing/setting of alarm signal behavior.
AUTH Set/display the Authorization Key and a list of
authorized features
BRIDGE
Used to turn bridging on or off, set transmission
type (broadcast/unicast, and ARP, unicast
only), and set filter parameters.
COM1 Set/display the configuration of COM1 port
(baud rate, data format, mode)
COM2
Sets/display the configuration of COM2 port
(baud rate, data format, mode, buffer status,
Radio Device Mode)
CONFIG Used to set/show/export/import the radio's con-
figuration file
DEVINFO Set/display the device configuration, including
serial number, hardware/software model
strings, software version, and build date.
DEVSET Display/configure device settings, including
owner name/message, sleep status, LED
mode, radio management mode
DLINK
Display/configure DLINK information
ENCRYPT Set/display the configuration for data encryp-
tion
ETHCONFIG Set/display the Ethernet port configuration
ETHPORT Display/configure Ethernet data support options
ETHSTATS Display/Clear Ethernet Statistics
HELP
Lists all supported commands. (See also
command at the beginning of this table.)
IOSTAT I/O Statistics. Allows viewing of I/O activity on of
the radio's interface ports and modules.
IPCONFIG Configure/Display local IP configuration infor-
mation
KEY
Enable transmitter keying. Optional argument
PWR displays measured RF output power.
LBT Listen Before Transmit on/off and LBT behavior
LINKTEST Configure/Execute Linktest
LOG Sets or displays the event log information
MDS 05-4846A01, Rev. C
DESCRIPTION
?
SD Series Ref. Manual (Packet & Transparent Mode)
COMMAND
LOGOUT Logs the user off and ends the terminal session
MENU Return to Text menu operations
MULTIHOST Enable/Configure Multihost support information
PACKET Enable/Configure serial packet setting informa-
tion
PASSWORD
Sets the user log-in password for the user at
current access level or below
PERF Display performance information
PING
Configure/Send Ethernet Ping to specified des-
tination
REBOOT Restarts the radio firmware
REMOTE Initiates remote configuration change, with pro-
vision for specifying key radio parameters.
REPROG_SER Used when reprogramming via serial connec-
tion, locally.
_LOC
REPROLOCAL
Reprogramming Configuration for TFTP repro-
gramming (local)
REPROREM Reprogramming Configuration for Over-the-Air
Reprogramming
RTU Configure built in RTU Simulator
SECURITY Sets security parameters (local login
required/not required, and Telnet Access
allowed/not allowed)
SETADV Set advanced radio configuration parameters
SETBASIC Set radio configuration power, modem and fre-
quency settings
STAT Shows the alarm status of the radio, listed by
Major, Minor, Status, and Informational events.
TELNET Used to list current Telnet session(s) or termi-
nate Telnet session
UPTIME
Display time since last boot in days hours min
sec
VERSION Display version information of bootloader and
loaded applications
DESCRIPTION
121