7.1 LED Indicators
The LED status indicators are an important troubleshooting tool and
should be checked whenever a problem is suspected. Table 10 on
Page 26 describes the function of each status LED and their normal indi-
cations.
7.2 Event Codes
When an alarm condition exists, the transceiver logs it as an "event" that
can be read on a connected PC via the
.
Statistics/Events Menu
Using the
submenu, users can check for currently active
Alarms/Events
alarms, whether they be Major, Minor, Status Conditions, or Informa-
tional Events.
Invisible place holder
Figure 77. Alarms/Events Submenu
Checking for Alarms
To check for alarms, access the following menu path on a connected PC:
.
Statistics/Events>>Alarms/Events
If an alarm exists, it will be displayed and identified as a Major or Minor
Alarm. The menu also offers many options for more detailed views of
alarms, status conditions, and informational messages.
A hexadecimal representation of alarms is also provided. This is
intended for use by automated systems that process alarm reports from
the transceiver.
94
SD Series Ref. Manual (Packet & Transparent Mode)
MDS 05-4846A01, Rev. C