Rack Cabling References; Rack Configuration Tools; Power Cabling References And Guidelines; Power Considerations For The Hp Netserver Lxr 8500 - HP D5970A - NetServer - LCII Reference Manual

2 Rack Cabling References

Rack Configuration Tools

Selected reference material derived from HP's rack configuration tools is
published in this chapter for convenience including the following:
necessary and optional components
rack power subsystem configuration and placement
current and power requirements
discussion of component location in the rack
routing cables through the Cable Management Arm and Cable Guide
cooling requirements and air flow
HP rack configuration tools are available on the worldwide web. Enter the
following URL in your browser:
www.hp.com/go/netserver
At that Web site, search for "configuration tools". Look for Rack Configuration,
Rack Assistant, and Order Assistant.
You can read about the tools or download copies for installation. Tools can be
used to plan a rack configuration for the components of your system.

Power Cabling References and Guidelines

Power Considerations for the HP NetServer LXr 8500

The HP NetServer LXr 8500 can be configured in either 208 or 230/240 VAC.
Power supply (UPS) and distribution (PDU) components are available to support
these configurations. A Redundant Switch is also available.
Details of power considerations for the HP NetServer LXr 8500 include:
the appropriate power cord for each server is shipped according to
voltage requirements; refer to Table 2-2 for details
available in 200/208 VAC configurations for the U. S. market
15