HP D5970A - NetServer - LCII Installation Manual page 43

Chapter 5
WARNING
The power supply will continue to provide standby current to
the NetServer until the power cable is disconnected.
4. Remove the NetServer from the rack. See the last section in Chapter 9.
5. Remove the top cover from the NetServer. See Chapter 3 for details.
6. Open the retaining clip s just enough so that you can lift the top edge of
the DIMM away from the clips.
7. Lift the DIMM completely away from the socket.
8. Place the DIMM in its anti-static container.
9. Repeat steps 6-8 for as many DIMMs as you need to remove.
Installing Additional Memory
35