Rear Panel Indicators And Ports - HP D5970A - NetServer - LCII Installation Manual

Chapter 2

Rear Panel Indicators and Ports

The HP NetServer's rear panel includes communication ports, the AC power inlet,
and the HP NetServer's three power supplies. The following sections describe the
power supply indicators, communication ports, and PCI LEDs in more detail.
All PCI slots have corresponding LED indicators located just above the PCI
hold-down latch. The LEDs are used to indicate the status of each slot and are also
visible from the inside the HP NetServer.
Figure 2-5 shows the rear of the HP NetServer.
PCI LED Indicators
AC
Power
Inlet
#1
Figure 2-5. Rear Panel of the HP NetServer
NOTE You will find information about setup and use of the HP
TopTools Remote Control card in HP's Information Assistant.
Information Assistant can be found on the HP NetServer
Online Documentation CD-ROM.
10
External
SCSI Port
#2 #3
Power Supplies
Controls, Indicators, and Ports
Serial, Parallel,
Monitor Ports
HP TopTools
Remote Control
Card and Connectors