Step 3: Install Msa Option Kits - HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive Installation Manual

Installation Procedures - All Deployments

Step 3: Install MSA option kits

If your plans include adding any of the available option kits for the MSA, install
them now. It is easier to install these options before racking the system.
Some of the available option kits include: additional controller cache, additional
SCSI I/O module, additional MSA controller, and additional Fibre Channel I/O
module.
Note:
and cooling, a blanking panel or component must be installed in the MSA chassis.
Note:
an additional Fibre Channel I/O module. Multi-path environments must include
separate and complete Fibre Channel fabrics and the associated hardware and
software components, including two controllers, two Fibre Channel I/O modules, two
Fibre Channel switches, and two HBAs in each server.
Note:
SCSI I/O module bays from right-to-left, so that the attached storage enclosures are
added in pre-assigned box-number order. See
connections" on page 48
For information about installing the options, refer to the instructions that came
with the option kit.
Go to
about your option kits.
36
Remove blanking panels only for the options being installed. For proper airflow
When installing an additional MSA controller, you must also obtain and install
When installing additional SCSI I/O modules, HP recommends populating the
for more information.
Table 10: "MSA1500
"Recommended SCSI cable
Information" on page 108 to record information
HP StorageWorks 1500 Modular Smart Array Installation Guide