4 Replacement Procedures
10. Stick the protection cover G (B), protection cover S (A), fixing tape (C) and fixing tape for
lead wire (C).
0 to 0.5 mm
Figure 4-89 Replacing Sharp fluorescent lamp (XGA) (23)
4-126
Fit the cover according to the outline of the screw.
(C)
Do not make the tape over the top of the module.
The tape MUST NOT appear on the display.
Stick the tape according to the outline of the
LCD module. Make sure the tape does not
appear on the side of the module.
4.30 Fluorescent Lamp
(A)
(B)
(C)
0 to 1 mm
Satellite A20 Maintenance Manual (960-444)