Yamaha DME Designer Owner's Manual page 393

Crossover
Click the Speaker Processor [Crossover] button to open the crossover editor window.
[Speaker Processor - Crossover] editor window
1
2
7
8 9
Section Parameter
1
Polarity Polarity
2
Mute Mute
3
Frequency Frequency
4
LPF Type
5
Frequency
6
Gc
3
4
5 6
Range
Normal/Inverted
ON/OFF
20 Hz to 20 kHz
Thru
6dB/Oct
12dB/Oct AdjustGc
12dB/Oct Butrwrth
12dB/Oct Bessel
12dB/Oct Linkwitz
18dB/Oct AdjustGc
18dB/Oct Butrwrth
18dB/Oct Bessel
24dB/Oct AdjustGc
24dB/Oct Butrwrth
24dB/Oct Bessel
24dB/Oct Linkwitz
36dB/Oct AdjustGc
36dB/Oct Butrwrth
36dB/Oct Bessel
48dB/Oct AdjustGc
48dB/Oct Butrwrth
48dB/Oct Bessel
48dB/Oct Linkwitz
20 Hz to 20 kHz
-6 dB to +6 dB
Chapter 6 Component Guide
Function
Inverts the polarity of each output channel.
Mutes the output of each output channel.
This parameter is linked to the Mute setting in
the original window.
Sets the crossover frequency between output
channels.
The display appears as a dotted line when
muted.
Sets the roll-off slope and filter type for each
octave.
The filter is bypassed when [Thru] is
selected.
Sets the LPF cutoff frequency.
Sets the cutoff frequency gain when the
[Type] setting is [AdjustGc] (Adjustable Gc).
DME Designer Owner's Manual 393